Specifications

Bankway Network Standards Guide - Novell Environment
This constitutes a trade secret of Fidelity National Information Services, Inc. 2006 Research & Development
Page 16 of 47
The Bankway Image Server is used to store your customer images. These images can be
signature cards, photo identifications or any other image you wish to store. The Image Server
will typically be located at the main Office or data center.
Note: The Image Server should be dedicated to the processing and storage of Bankway
images for the entire Bank.
The following information summarizes the Recommended Hardware Configuration for the
installation of Bankway’s imaging capabilities.
● Pentium® III – 1.0 GHz Processor or higher
● 512 MB Random Access Memory (RAM)
● SCSI hard drive controller using RAID 5 (disk striping)
● 20 GB free (usable) hard drive space
● 1.44 MB Floppy drive
● CD-ROM Drive
● SVGA Monitor (required resolution of 800 x 600 pixels) with 256 color resolution
● 100 Mbps Ethernet Card
● Internal Tape Backup (Required)
● Uninterruptible Power Supply (UPS) with surge protection
● Keyboard
● Mouse
The following information summarizes the software requirements for the installation of
Bankway’s imaging capabilities:
● Microsoft® Windows NT® Server 4.0 with Service Pack 6a, Microsoft® Windows®
2000 Server with Service Pack 4, or Microsoft® Windows® Server 2003
Note: Microsoft® Windows NT® Server 4.0 requires the Server Option Pack.
Internet Information Services is included on the Windows® 2000 Server CD.