MSDS

MATERIAL SAFETY
DATA SHEET
Grey CRACK-STIX
1
1
0
B
Section I: Company and Product Identification
PRODUCT NAME: CRACK-RITE
®
Grey CRACK-STIX™
SIZE: Grey CRACK-STIX™ Medium: 125 Linear Feet; Small 225 Feet
UPC #: 0 90932 02051 1 MODEL #: 02051 Medium
UPC #: 0 90932 02061 0 MODEL #: 02061 Small
MANUFACTURER NAME: Dalton Enterprises, Inc.
ADDRESS: 131 Willow Street Cheshire, CT 06410 USA
EMERGENCY PHONE NUMBER: [phone]
AFTER 5 PM AND ON WEEKENDS: [phone]
ORIGINATOR: J.B.
TRADE NAMES & SYNONYMS: CRACK-RITE, CRACK-STIX™
CHEMICAL FAMILY: Mixture
EFFECTIVE DATE: 09/18/12
DATE SUPERSEDED: 06/06/2012
Section II –Composition / Information on Ingredients
Mineral filler
CAS #
1317-65-3
%By WT.
30-60%
Rosin
N/A Proprietary
20-40%
Quartz
14808-60-7
10-25%
Butadiene-styrenecopolymer
9003-55-8
2-5%
Titanium Dioxide
13463-67-7
2-5%
Resin:
64742-16-1
2-5%
Refined Residual hydrocarbon:
64742-01-4
1-2.5%
Ingredients total weight % are below 100% only if all others unlisted are not considered hazardous by any
federal (OSHA, WHMIS, SARA), any state or province, or local Right-To-Know regulations.
Section III – Hazards Identification
Emergency Overview:
Acute Health Effects: Repeated or prolonged contact may cause irritations. Vapors or direct eye contact may
cause irritations. Ingestion may cause irritation. Short term inhalation toxicity is low. Breathing small amounts
during normal handling is not likely to cause harmful effects. Primary potential hazard is due to burns caused
from handling hot product during application. Overexposure to hot vapor may cause eye and respiratory tract
irritation, dizziness, headache, nausea, and flu like symptoms.
Page 1 of 5 Gray CRACK-STIX