MSDS

Page 3 of 4 PLI-STIX
CARCINOGENIC: N/A
EMERGENCY AND FIRST AID PROCEDURES:
Eyes: Hot materials may cause burns. Immediately flush with clean water for 15 minutes
while holding eyelids open, consult a physician.
Inhalation: If overcome by mist or vapor, remove from exposure immediately; call a physician.
If breathing is stopped or irregular, start resuscitation, administer oxygen.
Skin: Remove any contaminated clothing and wash skin with soap and warm water.
Vegetable or mineral oil can remove dry material. Do not use solvents or thinner to
clean skin
Ingestion: INDUCE VOMITING! Prevent aspiration of liquid into lungs Get immediate
medical attention
.
STABILITY: Stable
CONDITIONS TO AVOID: N/A
INCOMPATIBILITY (materials to avoid): Strong oxidizing agents.
HAZARDOUS POLYMERIZATION: Will Not Occur
HAZARDOUS DECOMPOSITION PRODUCTS: Hydrogen Sulfide, Sulfur Dioxide, Carbon Dioxide,
Carbon Monoxide and other unidentified hydrocarbons
CONDITIONS TO AVOID: High temperatures.
SARA TITLE III:
#302: No #304 CERCLA: No #313: Yes RCRA: No
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:
Remove all ignition sources. Ventilate the area. Wear suitable protective clothing, gloves &
eye/face protection. Put in a sealed approved container. Scoop up for reuse or disposal. Dispose
of in accordance with federal, state and local regulations.
WASTE DISPOSAL METHOD: Dispose in accordance with federal, state and local regulations.
REPORTABLE QUANTITIES (lbs): N/A TPO (lb): N/A
REGULATIONS: WHMIS, SARA, state and province HAZARDOUS WASTE: N/A
Section VI – REACTIVITY DATA
Section VII – SPILL OR LEAK PROCEDURES