Specification

______________________________________________________________________________
Dalton Enterprises, Inc., 131 Willow Street, Cheshire, CT 06410, USA
[e-mail] • Phone [phone] • Fax [phone] • www.crackstix.com
Revised 3/15/2013
TECHNICAL DATA SHEET
CRACK·STIX
™
Permanent Concrete
Joint & Crack Filler
MODEL #:2051, UPC#: 090932020511
MEDIUM 125ft (381.M) of 1/2” (12.7mm) diameter
MODEL #:2061, UPC#: 090932020610
SMALL 225ft (68.5M) of 1/4” (6.3mm)
PHYSICAL PROPERTIES
Appearance: Grey solid
Maximum VOC: 0
Application Temperature: 32°F (0°C) and rising
Specific Gravity: n/a
Viscosity: n/a
Weight Per Gallon: 12 lbs.
Color: Grey
Consistency: Solid
Boiling Point: 500°F (260°C)
Cure Time (50% relative humidity, 70ºF, 21.1°C): 20 minutes
Freeze ability: n/a
Container Size & Weight:
2 gallons, Approximately 12 lbs. (Small 225ft., Medium 125ft.)
PERFORMANCE TEST DATA
OPERTIES & PERFORMANCE
Meets or exceeds the requirements of ASTM C920-11 Standard Specification For Elastomeric Joint Sealants for the following
test parameters:
a. Classification: Type S – single component
b. Use: T
1
– For use in joints in pedestrian and vehicular traffic areas
c. Color: Pass – Color equals agreed upon color
d. Hardness: Shore A : 50 – Tested as per ASTM C661-01 Standard Method for Indentation Hardness of Elastomeric-Type
Sealants by Means of a Durometer
e. Tack Free Time: 5 minutes – Tested as per ASTM C679 Standard Test Method for Tack-Free Time of Elastomeric
Sealants
f. Adhesion in Peel: Pass >5 lbf Peel Strength and <25% Adhesion Bond Loss in all tests
Substrate
Dry Adhesion
(lbf, kg/M)
% Failure to
Substrate
Wet Adhesion
(lbf, kg/M)
% Failure to
Substrate
Failure Mode
Concrete
24, 35.7
0
25, 37.2
0
Cohesive
Carbon Steel
18, 26.8
0
37, 55
0
Cohesive
Glass
28, 41.6
0
34, 50.6
0
Cohesive
Aluminum
29, 43.1
0
34, 50.6
0
Cohesive
Meets or exceeds requirements of ASTM C794-10 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
Meets or exceeds requirements of ASTM D 3359, for Paintability as determined by application and testing of the following general
types of topcoat finish paints. Test Method for Measuring Adhesion by Tape Test
Top Coat Paint Type
Rating
% Failure
One Component Acrylic Latex Garage and Concrete Paint
5B
0
One Component Latex Masonary Waterproofing Paint
5B
0
Two Component High Solids Epoxy Top Coat
5B
0