User Guide

Built-in battery: DC 3.7V (3.7V / 1000mAh) rechargeable
lithium battery
External power supply: DC 6 ～ 12V
Max output: 5V / 150mA
Standby time:60 days（Without sunlight)
Standby current: <500uA
Alarm current: ≤350mA
Wireless frequency: 433MHZ (1527 code / 330K)
RX Sensitivity:-113dBm
Wired defense zones: 2 (Z0, Z1)
Wireless Zones: 50
Wireless Outdoor Alarm Siren
with Strobe Light
User Guide
Specifications
Siren alarm tone setting
Alarm sound frequency
Alarm sound delay time setting
PCB Diagram
This siren is completely free of wires, with a rechargeable
solar-powered battery, it can be used as a standalone siren, works
with other wireless sirens or accessories on the same alarm
system. It can also work as an on-site alarm system/panel when
paired with other wireless accessories, such as door / window
sensors, PIR sensors and remote control etc on the same wireless
frequency.
When any detector to which the alarm belongs is triggered, the
alarm panel will immediately sound in high decibel to deter illegal
intruders with warning light flashes
Backup battery
Alarm tone
setting
Solar panel
External power
supply
Delay time
setting
Setting
button
Warning light
Power switch
Tamper switch
600~1500Hz for
0.333~0.385s
Delayed by 1 minute
(factory default)
Delayed by 3 minute
Delayed by 5 minute
800Hz & 1000Hz for
1.67~2.5s
600~1500Hz for 3~5s Same as default
Wired zone Z0
Wired zone
Z1
Alarm siren
1
2
1
2
1
2
1
2
3
1
2
3
1
2
3
1
2
（Default)