User Guide

Foot/Pound Scale (5-80)
Center-line
Each mark
on handle = ½
ft/lb
DOWN
UP
HANDLE
Shown is 30
ft/lbs.
Torque
Values
Fig. 2 Fig. 3
Inch/Pound Scale (60-960)
Each mark
on handle
= 6 in/lb
Handle Edge
Torque
Value
Handle Scale
Value
Final
Torque Value
5 0 5
5 +½ detent 5.5
5 +1 detent 6
5 +1 ½ detents 6.5
5 +2 detents 7
Example 1: Set Wrench to 7 ft/lb
a) Position wrench handle so Foot/Pound scale is
visible.
b) Twist handle until “0” mark aligns with Center-line
and 5 Foot/Pound torque value.
c) Twist handle RIGHT 4 detents (1 detent =
½ Foot/Pound) stopping at the “2” Mark on
the Handle (while aligned VERTICALLY with the
Center-line).
d) Final setting (5 + ½ + ½ + ½ + ½ = 7)
e) Wrench is now set to 7 Foot/Pounds.
Example 2: Set Torque Wrench to
72 in/lb
a) Position wrench handle so Inch/Pound scale is
visible.
b) Twist handle until ‘0’ mark aligns with Center-line
and 60 Inch/Pound torque value.
c) Twist handle RIGHT 2 detents (2 detent = 12
Inch/Pound)
stopping at first “1” mark on handle.
d) Final setting (60 + 6 + 6 = 72)
e) Wrench is now set at 72 Inch/Pounds.
Torque
Value
Handle Scale
Value
Final Torque
Value
60 0 60
60 + ½ detent 66
60 +1 detent 72
=+
=+
3