User`s guide

21
DATACOLLECTOR USER’S GUIDE
Chapter 7: Meter Mode
In Meter Mode, current values for sensors are displayed, as well as the experiment
clock. No data is stored. The Meter icon in the status bar indicates that you are in
Meter Mode. See Figure 15.
The units are populated with default settings that corollate with the sensors. The
units can easily be changed. Tap the down arrow to access a drop-down menu of
units and make a selection.
The experiment clock can be started and stopped by either pressing the Go button
on the enclosure, or by tapping Start/Stop.
To reset the experiment clock to zero, tap the Reset icon.
Figure 15: Meter Mode