User`s guide

10
Alternatively, you may choose to open an old experiment. This is done by tapping
Files at the bottom of the Go! Window.
Data Collection: Meter Window
Once an experiment begins in Data Collection Mode, the Meter Window appears
(Figure 6).
Figure 6: Data Collection: Meter Window
The Meter Window displays the current readings for active sensors. The clock at
the bottom of the window shows the amount of time elapsed for the current exper-
iment.
In this example (Figure 6), two temperature probes are plugged in. The DataCol-
lector is able to automatically identify the sensors and load default unit settings if
the sensors are plugged in at the time the experiment is started.
To stop an experiment, push the Go button on the enclosure. The time at the bot-
tom of the screen will stop. The running man in the status bar will switch to a stop
sign, indicating the experiment has stopped.
When an experiment is stopped, the last readings are frozen and displayed in black
boxes at the right of the screen. The Meter Window will continue to show current
sensor readings.