Specifications

Multi-Channel Products for
Midland's® Syntech® XTR Radio
MCR320 The MCR320 is a console style remote designed for use with Midland's Syntech XTR
conventional underdash radios. The remote provides a desk
microphone, LED displays for channel indication, channel up and
down buttons, PTT indicator, monitor button and indicator, P-scan
button and indicator, N-scan button and indicator, A/D button and
indicator, intercom button and speaker volume control. The MCR320
allows incoming calls, as well as transmissions made using the radio
microphone, to be received through the speaker in the remote.
Transmissions made from a remote are heard on all parallel remotes
as well as over the radio speaker. The remote allows for intercom
capability between parallel remotes and between remotes and radio.
The channel display and indicators on all remotes mirror that of the
radio. The remote will work with both the 22 and 99 channel
versions of the radio but may not be compatible with all combinations of options.
MCR310 The MCR310 is a telephone style remote control unit designed
for use with Midland's Syntech XTR conventional underdash radios. The
remote provides a handset with PTT, LED displays for channel indication,
channel up and down buttons, PTT indicator, on-hook PTT capability,
monitor button and indicator, P-scan button and indicator, N-scan button and
indicator, A/D button and indicator, intercom button and speaker volume
control. The MCR310 allows incoming calls, as well as transmissions made
using the radio microphone, to be received through the speaker in the remote
and transferred to the earpiece when the handset is removed from the cradle.
Transmissions made from a remote are heard on all parallel remotes as well
as over the radio speaker. The remote allows for intercom capability between
parallel remotes and between remotes and radio. The channel display and
indicators on all remotes mirror that of the radio. The remotes will work with
both the 22 and 99 channel versions of the radio but may not be compatible
with all combinations of options.
MCP300 The MCP300 is the termination panel for use with the above remotes. The termination panel
consists of two parts. The first is a small adaptor board that is
installed in the radio. Installation is plug-in with no wire cutting,
crimping or soldering involved. The second is the termination panel.
It is housed in a rugged metal enclosure that mounts securely to the
top of the radio and connects to it via the power accessory plug. A
desk or hand microphone may then be plugged into one of the jacks
provided on the MCP300. The jack on the radio will not be used. The
system may use any two wire, full duplex voice grade circuit
between the radio and remote sites. The termination panel will work
with both the 22 and 99 channel versions of the underdash radios and
the conventional base stations but may not be compatible with all
combinations of options.