Specifications

Tone Panel Speci cations
subject to change without notice
Input voltage
+12 to +13.8 VDC @ 150 mA (18mA idle)
Line impedence
600 ohms
Line ouput to phone line
+10 dBm max. preset to 0 dBm
Line ouput from phone
line
-40 dBm to +10 dBm (function tone referenced)
RX input from radio
70 mVrms or greater
Notch  lter
2175 down 50 dB from 1000 Hz reference
Dimensions
TTP(N) series
TTP(N)-C/MR series
TTP216
5.3” wide x 1” high x 5” deep - unenclosed
5.5” wide x 1.5” high x 6.5” deep
5.5” wide x 1.5” high x 7.5” deep
Control Tones:
Guard tone = 2175Hz for 40 mS
Function tones F1-F16 = 1950-450 Hz for 40 mS
Monitor = 2050 Hz for 40 mS
Hold tone = 2175 Hz for duration of PTT
Control function outputs
PTT and monitor selection are form “C” relay contacts. 1 amp @30 VDC
F1/F2 are form “C” relay contact or open collector
F3-F16 are open collector
Option
Description
-C/TTP(N)
Black, vinyl clad steel and aluminum enclosure for the TTP(N) series
Rack/TTP(N)
Single height 19” rack holds 3 TTP(N), MR, or TTP216 panels
-80 cable
Pre-made cable connects the TTP(N) series to the KCT-19 connector on -80
series mobiles
-90 cable
Pre-made cable connects the TTP(N) series to the DB25 on the -90 series
216-90
Pre-made cable connects the TTP216 series to the DB25 on the -90 series
-MOT/cable
Pre-made cable connects the TTP(N) series to the 16 pin accessory connector
on most Motorola mobiles
216-MOT
Pre-made cable connects the TTP216 series to the 16 pin accessory connector
on Motorola mobiles. GM300, M1225 4 channel, and CDM series
CPI Communications, Inc. 941 Hensley Lane Wylie, TX 75098
Phone [phone] [phone] Fax [phone] www.cpicomm.com