User`s manual

41
Detection
Detection
c Select the desired channel, and
press “
Edit
Edit” to enter the motion
detection sensitivity and area setting
box.
d
Motion Detection Sensitivity
Motion Detection Sensitivity
:
Set the detection sensitivity in 4
different adjustable factors.
LS:
LS:
The sensitivity of comparing two
different images. The smaller the
value, the higher the sensitivity for
motion detection.
SS:
SS:
The sensitivity towards the size
of the triggered object on the screen
(the number of motion detection
grids). The smaller the value, the
higher the sensitivity for motion
detection.
TS:
TS:
The sensitivity towards how long
the object stays in the detection area
to get triggered. The smaller the
value, the higher the sensitivity for
motion detection.
RE:
RE:
The value of RE is a reference
for the detection. The bigger the
value is, the higher the sensitivity for
motion detection.
e
Alarm:
Alarm:
Select LOW / HIGH for the alarm
polarity.
f
Motion Detection Area
Motion Detection Area
:
By clicking the area with your
mouse, one can choose the motion
area to be detected.
The under
The under
-
-
detected area is in transparent while
detected area is in transparent while
the undetected area is in pink color.
the undetected area is in pink color.
*Click the “Select All” to activate the
detection area as full area.
*Click the “Clear All” to clean the
previously selected detection area.
g After setting, press “OK” and then
press “APPLY” to confirm.
Take 16CH as an example
Take 16CH as an example
Note: Enable the motion detection function.
When any motion is detected,
a “ ” icon will be shown on the
screen. And the software AP will
start recording automatically.