User`s manual

24
4.11 ADVANCE MENU___SYSTEM
4.11 ADVANCE MENU___SYSTEM
1) SERIAL TYPE:
Press “ENTER” or “＋”or “－” button to set the control serial type (RS-485, RS-232) of
DVR.
2) BAUD RATE:
Press “ENTER” or “＋”or “－” button to set the BAUD RATE of DVR
(2400, 9600, 19200, 57600).
3) HOST ID:
Press “ENTER” or “＋”or “－” button to set the ID of DVR (0 ~ 255).
4) IR:
Press “ENTER” or “＋”or “－” button to set the IR function on / off.
5) PASSWORD:
Press “ENTER” to set the password for accessing DVR (The default admin password
is 0000 and the default guest password is 1111). Users who use guest password to
access the DVR will be only allowed to view the live streaming video and sequence
display, shift the channel display, and lock keys.
6) RESET DEFAULT:
Press “ENTER”, and select “YES” to confirm or “NO” to cancel.
7) CLEAR HDD:
Press “ENTER” and “YES” to confirm clear HDD or “NO” to cancel.
In this function, you can press “＋”or “－” to select the HDD MASTER HDD, SLAVE
HDD or DISK ARRAY which you plan to clear.
8) UPGRADE:
Press “ENTER”, and select “YES” to confirm upgrade or “NO” to cancel.
9) R.E.T.R. (MIN):
Set R.E.T.R. activation time (3 / 5 / 10 minutes).
* R.E.T.R. activation ~
Press “Menu” + “－” buttons on the front panel. When the R.E.T.R. is on, a message
“R.E.T.R. ON” will be shown on the screen (in red text).
* R.E.T.R. off ~
Press any key (except “SHIFT” and “POWER” buttons) and enter the password.
10) AUTO KEYLOCK
:
Set the time-out after which the key lock function is activated.
(Never / 10 sec / 30 sec / 60 sec)
Move the cursor to “SYSTEM”, press ”ENTER”, and the screen will show the following
options.
SYSTEM
SYSTEM
SERIAL TYPE RS - 485
BAUD RATE 02400
HOST ID 003
IR ON
PASSWORD SETUP
RESET DEFAULT RESET
CLEAR HDD MASTER
UPGRADE NO
R.E.T.R. (MIN) 3
AUTO KEYLOCK NEVER
LANGUAGE ENGLISH
VERSION 1066-10-J4-04-AA-1
VIDEO FORMAT NTSC