User`s manual

21
4.8 ADVANCE MENU ___DISPLAY
4.8 ADVANCE MENU ___DISPLAY
Move the cursor to “DISPLAY”, press ”ENTER”, and the screen will show the following
options.
DISPLAY
DISPLAY
TITLE DISPLAY ON
DATE DISPLAY ON
HDD INFO ON
LOSS SCREEN BLUE
PLAYBACK INFO NORMAL
DWELL DURATION (SEC) 2
DE-INTERLACE ON
MONITOR OUT MAIN
OSD SETUP
WATERMARK ON
1) TITLE DISPLAY:
Turn the channel title display on / off.
2) DATE DISPLAY:
Turn the date display on / off.
3) HDD INFO:
Turn the display information of internal HDD on / off.
4) LOSS SCREEN:
Set the color of the video loss screen (blue or black)
5) PLAYBACK INFO:
Set the position where playback information will be indicated on the left hand
side of the bottom screen (center or normal).
6) DWELL DURATION (SEC):
Set the duration time of each channel for CALL MONITOR (2, 4, 8, 16 sec.)
7) DE-INTERLACE:
Set the “DE-INTERLACE” function on / off.
8) MONITOR OUT:
Select Select "MAIN" when the video output device is CRT monitor.
Select "VGA" when the video output device is LCD monitor.
Note: If the connected video output device is LCD monitor, but the setting here is "MAIN",
motion detection area setting will be disabled.
9) OSD:
Customize OSD color.
10) WATERMARK:
In the playback mode of the software AP, users could prove the authenticity
of the BACKUP VIDEO. If the BACKUP VIDEO had been altered, the video
image will turn to
light red
light red and the playback will be paused.
Please refer to P. 36 for detailed instruction.