User`s manual

19
4.7 ADVANCE MENU ___DETECTION
4.7 ADVANCE MENU ___DETECTION
Move the cursor to “DETECTION”, press ”ENTER”, and the screen will show the following
options.
DETECTION
DETECTION
TITLE DET AREA LS SS TS RE ALARM
01ONSETUP07030210OFF
02ONSETUP07030210LOW
03ONSETUP07030210HIGH
04ONSETUP07030210OFF
05ONSETUP07030210OFF
06ONSETUP07030210OFF
07ONSETUP07030210OFF
08ONSETUP07030210 OFF
PREV NEXT
DETECTION
DETECTION
DETECTION SETUP
DETECTION TIMER
1) DETECTION SETUP:
a) TITLE:
Show the title of each channel of the camera.
b) DET:
Select “ON” to activate the motion detection function of each channel.
Select “OFF” to inactivate the motion detection function of each channel.
c) AREA:
Press the “ENTER” button to set the detection area.
Pink blocks represent the area that is not being detected while the transparent blocks
are the area that is under detection.
Take 16CH as an example
Take 16CH as an example
Press “ENTER” to confirm the
start area
Press ◄ or ► to choose the
width of the area
Press ◄ or ► to choose the
height of the area, and press
“ENTER” again to confirm.
Multi-detected areas
Press “－” to set the whole
area under detection
Press “＋” to set the whole
undetected