User`s manual

ManualsBrandsCPcam ManualsComputer equipment8CH MPEG-4

4.5 MAIN MENU OPTIONS___ADVANCE

Move the cursor to “ADVANCE”, press ”ENTER”, and the screen will show the

following options.

(MENU)

RECORD

TIMER

DATE

►

ADVANCE

CAMERA

DETECTION

DISPLAY

ALERT

REMOTE

SYSTEM

NETWORK

BACKUP

HDD INFO

EVENT LOG

4.6 ADVANCE MENU ___CAMERA

Move the cursor to “CAMERA”, press ”ENTER”, and the screen will show the

following options.

1) TITLE:

Move the cursor to the title you want to change, and press “ENTER” to access

the setting screen. Assign each channel a title (up to six characters (letters or

symbols…)). The default title is the channel number.

2) BRIG / CONT / SATU / HUE:

Adjust the Brightness/Contrast/Saturation/Hue of each channel.

The level is from 0 to 255. The default value of BRIG is 110, and others are128.

3) COV (COVERT):

Select “YES” to mask the selected channel which is under recording.

When this function is activated, the “COV” word will be shown on the screen.

4) REC (RECORD):

Select “YES” to enable the record function. Select “NO” to disable the recording.

5) PREV / NEXT:

Select “PRE” to go to the previous page. Select “NEXT” to go the next page.

CAMERA

TITLE BRIG CONT SATU HUE COV REC

01 110 128 128 128 NO YES

02 110 128 128 128 NO YES

03 110 128 128 128 NO YES

04 110 128 128 128 NO YES

05 110 128 128 128 NO YES

06 110 128 128 128 NO YES

07 110 128 128 128 NO YES

08 110 128 128 128 NO YES

PREV NEXT

Take 16CH as an example