User`s manual

7
7) “PLAY” : (g)
Press “PLAY” button to playback the recorded files.
8) “MENU” : (h)
Press “MENU” button to enter main menu.
9) “ENTER”/ “SET”: (i)
Press “ENTER” button to confirm.
Press “SET” to change channel display position.
Press “ “ “ “ “ “ “ “ to select the channel which you like to change,
Press “＋”or “－” select the channel which You would like to show.
10) “REC” : (j)
Press “REC” to activate the manual recording.
11) “SEARCH ”: (k)
Press “SEARCH” button to enter the search mode.
12) “SLOW ”: (l)
Under playback mode, press “SLOW“ button to show slow playback.
13) “ZOOM ”: (m)
Press “ZOOM” button to enlarge the picture of selected channel (2X digital zoom).
14) “ ” / “ － ”: (n)
Press “ “ button to show the 4 channel display mode.
Press “ － ” button to change the setting in the menu.
15) “SEQ”/ “＋ ”: (o)
Press “SEQ” button to activate the call monitor function and press “SEQ” button
again to escape the call monitor mode.
Press “＋ ” button to change the setting in the menu.
16) “ ” : (l) + (m)
Press these two buttons to select live or playback sounds of the 4 audio channels.
17) “ ” : (n) + (o)
Press these two buttons at the same time to enter / exit the PTZ control mode.
18) “R.E.T.R.” : (h) + (n)
Press “MENU” + “－” button to activated R.E.T.R. function 3 / 5 / 10 minutes later.
Please refer to “Section 4.11” for details.
19) “ ” or “ ” + “POWER” (c) + (e)
Press and hold “ ” or “ ”, and press “POWER” to switch to NTSC or PAL
system. Please see “5.4 SWITCHING THE N/P SYSTEM
” at P.30.