52 http://www.cpcamcctv.com Digital Video Recorder 4CH 16CH / 8CH / 4CH 16CH / 8CH / 4CH Built-in DVD-RW Writer or CD-RW Writer User’s Manual Please read instructions thoroughly before operation and retain it for future reference. CPcam MPEG4 DVR SERIES_V1.
IMPORTANT SAFEGUARD CAUTION RISK OF ELECTRIC SHOCK CAUTION: To reduce the risk of electric shock, do not expose this apparatus to rain or moisture. Only operate this apparatus from the type of power source indicated on the label. The company shall not be liable for any damages arising out of any improper use, even if we have been advised of the possibility of such damages.
TABLE OF CONTENTS PARTS AND FEATURES 1.1 1.2 1.3 1.4 1.
PARTS AND FEATURES 1.1 FEATURES MPEG4 DVR Technology: Compression format providing crystal clear images with real time performance Multiplex: Allow live display, record, playback, backup, and network all at the same time LongLong-Recording Hours: 500GB can record more than 4 days.
1.
MODEL 16CH / 16CH (D) 8CH / 8CH (D) 4CH / 4CH (D) Specification Continued … Dwell Time (Sequential Channel Switch) Alarm I/O Programmable with adjustable dwell time (2, 4, 8, 16 sec.
1.4 FRONT PANEL 16CH / 8CH 16CH (D) / 8CH (D) / 4CH (D) a b c d e f g h i j k l m n 1) POWER: (a) Press “POWER” button to turn on/ turn off the DVR. (Under the recording mode, please stop recording before turning off the DVR) 2) MENU: (b) Press “MENU” button to enter the main menu. 3) ENTER / RECORD : (c) Press “ENTER” button to confirm. / Press “ 4) “＋ CH. － ”: (d) Press “＋“ or “－” button to change the setting in the menu / to select the channel.
10) “ “: (k) Under the playback mode, press “ ” button to do fast rewind. 11) “ “: (l) Under the playback mode, press “ ” to do fast forward. 12) “ZOOM”: (m) Press “ZOOM” button to enlarge the picture of the selected channel (2X digital zoom). 13) “PLAY” : (n) Press “PLAY” button to play the recorded files. 14) “▲▼◄►“: (i), (j), (k), (l) Press “▲▼◄►” to move the cursor up / down / left / right.
1.4 FRONT PANEL Continued… g 4CH a b h c i j k l m n o d e f 1) “HDD Cartridge Lock” : (a) Lock / Unlock the cartridge of the HDD. 2) “USB” : (b) Support firmware update and file backup. 3) “UP / PAUSE , DOWN / STOP, LEFT / FAST REWIND, RIGHT / FAST FORWARD“ : (c) Press “ ““ ““ ““ “ to move the cursor up / down / left / right.
7) “PLAY” : (g) Press “PLAY” button to playback the recorded files. 8) “MENU” : (h) Press “MENU” button to enter main menu. 9) “ENTER” / “SET” : (i) Press “ENTER” button to confirm. Press “SET” to change channel display position. Press “ ““ ““ ““ “ to select the channel which you like to change, Press “＋” or “－” select the channel which You would like to show. 10) “REC” : (j) Press “REC” to activate the manual recording. 11) “SEARCH ”: (k) Press “SEARCH” button to enter the search mode.
1.5 REAR PANEL 14 16CH / 16CH (D) 13 12 1 LOOP 2 3 4 5 6 7 8 9 16 15 10 11 12 13 14 15 16 MONITOR INPUT 1 75? 8 16 CALL 1 3 2 4 HI-IMPEDANCE RS 485 DISKARRAY 75? 9 HI-IMPEDANCE 17 EXTERNAL I/O IR LAN D/V USB LINK ACT.
1) DISK ARRAY PORT: Connect to one disk array for extending HDD capacity. 2) IR PORT: Connect to the IR receiver. 3) RS485 PORT: Connect to external devices (such as PTZ camera) with RS485-A and RS485-B. 4) EXTERNAL I/O PORT: Insert the supplied 15PIN DSUB to this port for connecting external devices (alarm input, external alarm, PTZ camera). For detailed I/O port PIN configuration, please refer to Appendix #2. USB PORT: Support firmware update and file backup.
GETTING STARTED 2.1 GETTING STARTED Connect all the devices to construct a surveillance. 1) Install HDD: The HDD must be installed before the DVR is turned on. Please refer to Appendix #1 for HDD installation instructions. 2) Connect cameras, monitors and external devices. Please refer to “Section 1.5 Rear Panel” for connection, and Appendix#2 for pin configurations of the external I/O port. NOTE: Be sure the cameras are connected and power-supplied before the DVR is powered on.
BASIC OPERATION 3.1 RECORDING The DVR offers three recording modes: manual record, event record and timer record. If the power is off accidentally, recorded video files will still be stored in the HDDs. The DVR will return to its original recording status after the power is on again. 1) MANUAL RECORDING (continuous recording): Recording is initiated by manually pressing the “REC” button, indicated by the sign “●”.
3.2 PLAYBACK 16CH / 8CH 16CH (D) / 8CH (D) / 4CH (D) Press “ PLAY ” button, and the DVR will display the last recorded video. 1) FAST FORWARD (F.F. ) & FAST REWIND (REW): You can increase the speed for fast forward and rewind on the DVR. In the playback mode, ＊ Press ” ” once to get 4X speed forward and press twice to get 8X speed, etc., and the maximum speed can reach 32X. ＊ Press ” ” once to get 4X speed rewind and press twice to get 8X speed, etc., and the maximum speed can reach 32X.
4CH Press “ PLAY ” button, and the DVR will display the last recorded video. 1) FAST FORWARD (F.F. ) & FAST REWIND (REW): You can increase speed for fast forward and rewind on the DVR. In the playback mode, ＊ Press ” ” once to get 4X speed forward and press twice to get 8X speed, etc., and the maximum speed is 32X. ＊ Press ” ” once to get 4X speed rewind and press twice to get 8X speed, etc., and the maximum speed is 32X. ＊ The type of recorded image size (Frame or CIF) will also be shown on the screen.
DETAILED MENU CONFIGURATION 4.1 MENU TREE MENU TITLE RECORD TIMER DATE ADVANCE BRIG CAMERA MANUAL RECORD ENABLE EVENT RECORD ENABLE TIMER RECORD ENABLE DATE DATE: YEAR MONTH DAY SATU HUE START HH : MM TIME: HOUR MIN SEC COV END HH : MM FORMAT: YY-M-D … REC DETECTION DAYLIGHT SAVING AREA DISPLAY LS ALERT RECORD QUALITY MANUAL RECORD IPS EVENT RECORD IPS TIMER RECORD IPS TOTAL IPS SHARE TITLE DET OVERWRITE RECORD IMG SIZE CONT TITLE DISPLAY DATE DISPLAY SS EXT. ALERT HDD INFO INT.
4.2 MAIN MENU OPTIONS___RECORD Press “MENU” button to enter the main menu list. The default admin password is 0000. Enter the default password and press “ENTER”. (Users could alter the password later. Please refer to “Section 4.11 ADVANCE MENU_SYSTEM”) Move the cursor to “RECORD” and press ”ENTER”. The screen will show the following options.
8) EVENT RECORD IPS: Recording is activated by events (alarm and motion trigger). Select the images per second for event recording. The options are as the followings: NTSC: PAL: NTSC FRAME: 120, 60, 30, 15 PAL FRAME: 100, 50, 25, 12 CIF: 480, 240, 120, 60 CIF: 400, 200, 100, 50 9) TIMER RECORD IPS: Recording is activated by the timer schedule. Select the images per second for timer recording.
1) DATE: A scheduled record date (SUN/MON/TUE/ WED/ THU/ FRI/ SAT/ MON–FRI / SAT-SUN / DAILY/OFF) could be set to activate the timer recording. NOTE 1 : Specific date could be changed by “＋” or “－” button. NOTE 2 : If you plan to set the timer recording across the midnight, there are two ways for setting the timer recording schedule. Please follow the instructions below.
4.5 MAIN MENU OPTIONS___ADVANCE ADVANCE CAMERA DETECTION DISPLAY ALERT REMOTE SYSTEM NETWORK BACKUP HDD INFO EVENT LOG (MENU) RECORD TIMER DATE ► ADVANCE Move the cursor to “ADVANCE”, press ”ENTER”, and the screen will show the following options. 4.6 ADVANCE MENU ___CAMERA Move the cursor to “CAMERA”, press ”ENTER”, and the screen will show the following options.
4.7 ADVANCE MENU ___DETECTION Move the cursor to “DETECTION”, press ”ENTER”, and the screen will show the following options.
▲▼◄►: navigates between targets. d) LS : The sensitivity of comparing two different images. The smaller the value, the higher the sensitivity for motion detection. The highest sensitivity setting is 00, and the lowest sensitivity setting is 15. The default value is 07. e) SS : The sensitivity towards the size of the triggered object on the screen (the number of motion detection grids). The smaller the value, the higher the sensitivity for motion detection.
4.8 ADVANCE MENU ___DISPLAY Move the cursor to “DISPLAY”, press ”ENTER”, and the screen will show the following options. DISPLAY TITLE DISPLAY DATE DISPLAY HDD INFO LOSS SCREEN PLAYBACK INFO DWELL DURATION (SEC) DE-INTERLACE MONITOR OUT OSD WATERMARK ON ON ON BLUE NORMAL 2 ON MAIN SETUP ON 1) TITLE DISPLAY: Turn the channel title display on / off. 2) DATE DISPLAY: Turn the date display on / off. 3) HDD INFO: Turn the display information of internal HDD on / off.
4.9 ADVANCE MENU ___ALERT Move the cursor to “ALERT”, press ”ENTER”, and the screen will show the following options. ALERT EXT. ALERT INT. BUZZER KEY BUZZER VLOSS BUZZER MOTION BUZZER ALARM BUZZER HDD BUZZER HDD NEARLY FULL (GB) ALARM DURATION (SEC) PRE-ALARM ON ON ON ON ON ON ON 05 05 OFF 1) EXT. ALERT: Set the sound on / off when the external alarm is triggered. 2) INT. BUZZER: Set the sound of KEY / VLOSS / MOTION / ALARM / HDD FULL on or off.
4.10 ADVANCE MENU ___REMOTE Move the cursor to “REMOTE”, press ”ENTER”, and the screen will show the following options. Take 16CH as an example TITLE 01 02 03 04 05 06 07 08 PREV DEVICE PTZ CAMERA CAMERA CAMERA CAMERA CAMERA CAMERA CAMERA NEXT REMOTE ID 001 002 003 004 005 006 007 008 PROTOCOL P-D NORMAL NORMAL NORMAL NORMAL NORMAL NORMAL NORMAL RATE 02400 02400 02400 02400 02400 02400 02400 02400 1) TITLE: Title of each camera.
4.11 ADVANCE MENU___SYSTEM Move the cursor to “SYSTEM”, press ”ENTER”, and the screen will show the following options. SYSTEM SERIAL TYPE BAUD RATE HOST ID IR PASSWORD RESET DEFAULT CLEAR HDD UPGRADE R.E.T.R. (MIN) AUTO KEYLOCK LANGUAGE VERSION VIDEO FORMAT RS - 485 02400 003 ON SETUP RESET MASTER NO 3 NEVER ENGLISH 1066-10-J4-04-AA-1 NTSC 1) SERIAL TYPE: Press “ENTER” or “＋” or “－” button to set the control serial type (RS-485, RS-232) of DVR.
11) LANGUAGE (support multi-language): Press “ENTER”, and select the language of the OSD. 12) VERSION: The firmware version information will be shown on the screen. 13) VIDEO FORMAT: The information of the DVR’s video format will be shown on the screen. 4.12 ADVANCE MENU___NETWORK Move the cursor to “NETWORK”, press ”ENTER”, and the screen will show the following options. NETWORK NETWORK TYPE DNS PORT 1) STATIC 168. 95. 0080 1.
4.13 ADVANCE MENU___ BACKUP 16CH / 8CH / 4CH 16CH (D) / 8CH (D) / 4CH (D) Move the cursor to “BACKUP”, press ”ENTER”, and the screen will show the following options. BACKUP USB BACKUP Select “USB BACKUP” and then press “Enter”. USB BACKUP START TIME END TIME AVAILABLE SIZE CHANNEL HDD NUM BACKUP TO USB 2006-05-12 16 : 00 : 00 2006-05-12 21 : 00 : 00 4083 MB ● 01 ● 02 X 03 X 05 X 06 X 07 X 09 X 10 X 11 X 13 X 14 X 15 MASTER START X 04 X 08 X 12 X 16 1) START TIME: Select the start time of the backup.
16CH (D) / 8CH (D) / 4CH (D) Move the cursor to “BACKUP”, press ”ENTER”, and the screen will show the following options. BACKUP USB BACKUP DISK BACKUP Select “DISK BACKUP” and then press “Enter”. DISK BACKUP START TIME END TIME AVAILABLE SIZE CHANNEL HDD NUM BACKUP TO DISK 2006-05-12 16 : 00 : 00 2006-05-12 21 : 00 : 00 4083 MB ● 01 ● 02 X 03 X 05 X 06 X 07 X 09 X 10 X 11 X 13 X 14 X 15 MASTER START X 04 X 08 X 12 X 16 1) Press “＋” and “－” buttons to open the DVD / CD WRITER.
4.14 ADVANCE MENU___HDD INFO You can get all the capacity information of the connected HDD. HDD INFO HDD NUM MASTER EXT001 EXT003 EXT005 EXT007 EXT009 EXT011 HDD SIZE 400.517 400.517 400.517 NO HDD NO HDD NO HDD NO HDD HDD NUM SLAVE EXT 002 EXT 004 EXT 006 EXT 008 EXT 010 EXT 012 HDD SIZE NO HDD 400.517 NO HDD NO HDD NO HDD NO HDD NO HDD 4.
5.1 SEARCH ADDITIONAL OPERATION 16CH / 8CH 16CH (D) / 8CH (D) / 4CH (D) Press “ ”+“ ” buttons on the front panel of the DVR to enter the search mode. Then the screen will show the following options. 4CH Press “SEARCH” button on the front panel of the DVR to enter the search mode. Then the screen will show the following options. 1) HDD: Master HDD. 2) FULL LIST: Show the time list for all types of the recorded files.
5.2 2X DIGITAL ZOOM Press “ZOOM” button on the front panel of the DVR to enlarge the picture of selected channel (2X digital zoom). You will have ¼ view size of the enlarged picture. Therefore use the “ ▲▼◄► “ to navigate. Normal View Zoom View 1) Press “ZOOM” button again to exit the zooming. 2) Press “ ▲▼◄► “ button to move the zoom position. 3) Users can also press “Digital Zoom” button on the IR remote control. 5.
5.5 USB UPGRADE Users can use USB to upgrade. Please format the USB memory device as FAT 32 format first. 1) Get the upgrade files from your distributor. 2) Save the upgrade files in your USB device (Do not change the file name). 3) Go to the “MENU – SYSTEM - UPGRADE” , and press “ENTER”. 4) Select “YES”, and press “ENTER” again to confirm upgrade.
2) AP Basic Operation: Operation c Connect your DVR to PC via RJ45 network line. d LAN Setting : The default DVR IP is “192.168.1.10”, and default “username” and “password” are both “admin”. Users should set PC’s IP address as “IP:192.168.1.XXX” XXX (1~255, except 10) in order to make the PC and DVR under the same domain. e Double click to enter login page. Key in IP address (192.168.1.10), your username (admin), password (admin), port (80) in the login page.
AP Control Panel i Digital Device Control Panel ~ Take 16CH DVR as an example a c d e b f g h i j. k. l. m. n. o. p. q. r. s. t. u. a. Image Transfer Rate Per Second b. Data Transfer Rate c. Connect / Disconnect d. Resolution: NTSC: 320 × 228 PAL: 320 × 276 v. w. ; 640 × 456 ; 640 × 552 e. Image Quality (High, Medium, Low) f.
g. h. i. j. k. l. m. n. o. p. q. r. s. t. u. v. w. x. Record : press this button to start recording, and press this button again to stop recording. The recorded files will be saved to the designed path on the PC. Each recording file can be up to 18,000 frames. When the recorded file is full, the new recorded file will be saved as the second file. If the HDD space is less than 200MB, the program will stop recording. SYSTEM CONFIG: press this button to enter the setting page of the software AP.
Digital Device Control Panel ~ PTZ j. k. l. j. k. l. m. n. o. p. q. r. m. n. o. p. q. r. Hot Point: You can control your PTZ camera screen Preset 1 ~ 16 to a specific point by using the cursor. AUTO Zoom Tele Zoom Wide Focus Near Focus Far Max Zoom In Max Zoom Out Enter PTZ Control On / Off: When the PTZ control mode is turned on, users can select the PTZ device and press “OK” button to enter the PTZ control AP screen.
j AP Playback Operation AP Playback Window : One click to activate AP Config. Setting Box : • De-interlace • De-blocking • OSD • AVI Convert • Config. Setting • Watermark • Open Previous File • Open Next File A B A. Playback Information : Display information such as “Date”, “Time”, “Resolution”, “ Rewind / Forward Speed”, “Status” and “Functions”, etc. B. Time Progress Bar : Show the playback progress status. C.
3) AP Advanced Setting: Setting Press “System Config ” button to enter the system setting page. Network The network configuration allows the DVR to connect to an Ethernet network or dial-up network. c Static IP: Enter the “Server IP”, “Gateway”, “Net Mask” and “Web Port”, then press “APPLY” to confirm. d PPPoE: Enter the “User Name” and “Password” provided by your ISP (Internet Service Provider) supplier, then press “APPLY” to confirm.
DDNS c d e f DDNS is a service for transforming the dynamic IP corresponding to a specific “Hostname”. DDNS Apply: Go to a website which provide free DDNS services and apply a “Hostname”. See the example below. Enable the DDNS function: function Enter your DDNS user name into “User Name” column. Enter your DDNS password into “Password” column. Enter your host name into “Domain” column. Choose one DDNS system name from “System Name” column. After setting, press “APPLY” to confirm.
Mail c When the recording is triggered by an alarm or a motion, a video copy file can be captured. The DVR will send an e-mail notification to the assigned recipients (up to 5 recipients). ***Note***: To activate the e-mail notification function, please enable the function of e-mail notification in the “Alarm” setting first (page 43). d Add the recipients’ email accounts in “Mail Account” column. For detailed information (SMTP server, username and password), please get from your e-mail system supplier.
DVR – Camera Setting Take 16CH as an example c Each camera channel can be adjusted independently. d Select the desired camera channel. Press “Edit” Edit to enter the setting box. e Title: Enter the camera channel name up to 6 characters. f Adjustment: Adjust the BR (brightness) / CT (contrast) / SU (saturation) / HU (hue) / REC (recording) of the camera. g After setting, press “OK” and then press “APPLY” to confirm.
Detection Take 16CH as an example c Select the desired channel, and press “Edit” Edit to enter the motion detection sensitivity and area setting box. d Motion Detection Sensitivity: Sensitivity Set the detection sensitivity in 4 different adjustable factors. LS: The sensitivity of comparing two different images. The smaller the value, the higher the sensitivity for motion detection. SS: The sensitivity towards the size of the triggered object on the screen (the number of motion detection grids).
Network Backup & Playback c Backup the recorded files from your DVR to your PC via network. d Enter the backup information and then press "Start" button. When the backup is succeeded, "DVR-Network Backup" pop-up window will show. Then, press "PLAY“ button to directly convert and play back the file. 1 2 1. Playback Information 3 (1) De-interlace (2) De-blocking (3) OSD (4) AVI Conversion (5) Config. Setting (6) Watermark (7) Open Previous (8) Open Next File 5 6 4.
Search List c HDD Number: Number Select one HDD (Master). d List Type: Type Select one list type (All/ Manual/ System/ Alarm/ Motion). e Max List Number: Number Maximum number of the list (128) f Download HDD List: List Press this button to start downloading the list. Timer Record In this menu, you can schedule 7 different sets of time for recording. c DATE: DATE Choose a day from “DATE” dropdown menu. The options are OFF, SUN, MON,TUE, WED, THU, FRI, SAT, MON-FRI, SAT-SUN and DAILY.
Date In this menu, you can set the date for your DVR. c DATE: DATE Choose the current date from “DATE” drop-down menu and enter the current time. When you click the dropdown menu, a calendar like the picture below shows for you to set the current date. d FORMAT: FORMAT Choose the format for date display from the three options: Y-M-D, D-M-Y and M-D-Y.
Alarm c d e f g Alarm Trigger: Trigger Enable or disable Email and FTP notification function. Alarm Method: Method Two notification methods — Email and / or FTP. Post Numbers: Numbers Set MJPEG pictures (1-10 pictures). Alarm Duration: Duration Set the duration time of motion trigger recording (5 SEC, 10 SEC, 20 SEC, 40 SEC). Alarm Refresh: Refresh Clean the alarm message “ ” which is shown on the screen.
Account c Set up the user’s account ( Max 5 accounts), password, life time, and authority level (Max 5 users on line at the same time). time d User’s level: SUPERVISOR — Control all the functions (“a”, “b”, “c”, “d”, “e” and “f” ). HIGH — Control only “a”, “b”, “c”, “d” and “e” functions, but cannot control “f” function. NORMAL — Control only “a”, “d”, and “e” functions, but cannot control “b”, “c” and “f” functions. GUEST — Watch the image only. Only “a” function can be used.
5.7 OPERATION VIA IE BROWSER The DVR can be viewed over the network with IE web browser. Please install the licensed software AP first. *** This function is suitable in both Windows 2000 and Windows XP XP *** Step 1: 1 Type one IP address into the URL address box and press Enter. Then you’ll see the following page. NOTE: If the TCP port number is not 80, see the example below. IP address: 60.121.46.236 ; Port number: 888 Æ Key in “http://60.121.46.236 :888” into the URL address box and press Enter.
5.8 R.E.T.R. Before activating the R.E.T.R. function, please set the detection area and activate the motion detection function first. There are three ways to activate the Remote Event Trigger Recording function. 1) DVR Front Panel: Press “Menu” + “－” buttons on the DVR front panel. And R.E.T.R. function will be activated 3 / 5 / 10 minutes later. Please refer to “Section 4.11” 4.11”. When the R.E.T.R. is activated, the red “R.E.T.R” OSD will be shown on the screen. 2) Licensed Software AP: Press “R.E.T.
TROUBLESHOOTING 6.1 FAQ Please refer to the FAQ table below for easy troubleshooting. The table below describes some typical problems and also their solutions. Please check them before calling your DVR dealer. PROBLEM No power SOLUTION Check power cord connection. Confirm that there is power at the outlet. Not working when pressing any button Press any key and then enter the password to exit “Key Lock” mode. Timer record is not working Check if the “RECORD ENABLE” is set to “YES”.
APPENDIX #1 APPENDIX #1 – INSTALL THE HDD 16CH / 8CH 16CH (D) / 8CH (D) / 4CH (D) Carefully follow the steps to ensure correct installation. *** Note: If you want to install two HDDs, please set one HDD to “Master Mode” or “Single Mode”, and the other one to “Slave Mode”. *** 1 2 1) Open the upper cover of the DVR and screw out the bracket. 2) Screw HDD to the HDD bracket. 3 ~ 8 3) Connect the HDD to the power connector and IDE BUS (make sure to align the HDD precisely to the pin connection).
4CH Carefully follow the steps to ensure correct installation. *** Note: Please set one HDD to “Master Mode” or “Single Mode” *** • Step 1 Connect the connector with the HDD (Pic. 1). • Step 2 Put HDD into the HDD cartridge with the pins facing outside (Pic. 2). • Step 3 Fasten the HDD to the cartridge. Before you fasten the HDD, please be aware that you must to align the pins of the HDD with the pin marks of the cartridge. Then fasten the HDD correctly (Pic. 3 & 4).
APPENDIX #2 APPENDIX #2 – PIN CONFIGURATION 16CH / 8CH 16CH (D) / 8CH (D) PIN FUNCTION DESCRIPTION 1 GND GROUND 2~9 ALARM INPUT When connecting the wire from ALARM INPUT (PIN 2 -- 9) to GND (PIN 1) connector, DVR will start recording and the buzzer will be on. When “MENU -> CAMERA -> ALARM” is set to “Low” : When the alarm input signal is “ Low ”, the unit starts to record and buzzer.
4CH / 4CH (D) Solder Side of DSUB 15 PIN 8 7 6 5 4 3 2 1 15 14 13 12 11 10 9 16 17 PIN FUNCTION DESCRIPTION 1 RS232-TX DVR can be controlled remotely by the keyboard of PC by using RS-232 serial communication signals. 2 RS232-RX DVR can be controlled remotely by the keyboard of PC by using RS-232 serial communication signals. 3~6 ALARM INPUT To connect the wire from ALARM INPUT ( PIN 3 -- 6 ) to GND ( PIN 9 ) connector, DVR will start recording and the buzzer will be on.
APPENDIX #3 APPENDIX #3 – RS-232 Protocol 1) Use PC keyboards to simulate DVR keypads. 2) Data: REMOTE PROTOCOL uses 8 bit data, 1 start bit, 1 stop bit.
APPENDIX #4 APPENDIX #4 – RECORDING TIME TABLE Take 16CH as an example 1) Recording time varies depending on the following factors: * Different camera quality * Different picture composition (such as frequency of the object movement) 2) Record day for 8CH: please multiply “Record day” by 2. Record day for 4CH: please multiply “Record day” by 4.
APPENDIX #5 APPENDIX #5 – COMPATIBLE USB BRAND Please upgrade the firmware of the DVR to the latest version to ensure the accuracy of the following table. If the USB flash drive is not supported by the DVR, the "USB ERROR" message will be shown on the screen. NOTE: Please use PC to format the USB flash drive as "FAT 32".
APPENDIX #6 APPENDIX #6 – COMPATIBLE HDD BRAND NOTE: Please upgrade the Firmware of the DVR to latest version to ensure the accuracy of following table Brand Name Model Capacity Rotation HITACHI Deskstar HDS728080PLAT20 80GB 7200 rpm HITACHI Deskstar 180 GXP 120GB 7200 rpm HITACHI Deskstar 7K250, HDS722516VLAT20 160GB 7200 rpm HITACHI HDS722516VLAT80 160GB 7200 rpm HITACHI HDS722516DLAT80 160GB 7200 rpm HITACHI Deskstar 7K250, HDS722525VLAT80 250GB 7200 rpm HITACHI Deskstar 511D
