User`s manual

1.3 SPECIFICATION
1.3 SPECIFICATION
2
16 12 grid per camera for all channels
Motion Detection Area
4 audio inputs, 2 audio outputs (Mono)Audio I/O
4 adjustable variable with precise calculation for motion detectionMotion Detect Sensitivity
Yes (Coming Soon)Support SATA HDD
Yes (Coming Soon)Watermark
8 channels: 240 IPS for NTSC /
200 IPS for PAL
8 channels ~
Frame: 60, 30, 15, 7 IPS <NTSC> / 50, 25, 12, 6 IPS <PAL>
CIF: 240, 120, 60, 30 IPS <NTSC> / 200, 100, 50, 25 IPS <PAL>
8 channels ~
Frame: 720 480 pixels with 60 IPS NTSC / 720 576
pixels with 50 IPS PAL
CIF: 352 240 pixels with 240 IPS NTSC / 352 288
pixels with 200 IPS PAL
16 channels: 480 IPS for NTSC /
400 IPS for PAL
Refresh Rate
IDE type, ATA66, supported HDD 2, support each HDD capacity
over 400GB
Hard Disk Storage
Best, High, Normal, and BasicImage Quality Setting
16 channels ~
Frame: 120, 60, 30, 15 IPS <NTSC> / 100, 50, 25, 13 IPS <PAL>
CIF: 480, 240, 120, 60 IPS <NTSC> / 400, 200, 100, 50 IPS <PAL>
Adjustable Recording Speed
Yes (8 MB)Pre-alarm Recording
Pentaplex functions (live display, record, playback, backup, and
network)
Pentaplex Operation
Manual Timer Motion Alarm / Remote
Recording Mode
Quick clean up the “index system” of the recorded files.
250GB under 2 seconds
HDD Quick Cleaning
16 channels ~
Frame: 720 480 pixels with 120 IPS NTSC / 720 576
pixels with 100 IPS PAL
CIF: 352 240 pixels with 480 IPS NTSC / 352 288
pixels with 400 IPS PAL
Maximum Recording Rate
Main Monitor Output: Composite video signal 1 Vp-p 75 BNC
Call Monitor Output: Composite video signal 1 Vp-p 75 BNC
Video Output
16 / 8 Channels. Composite video signal 1 Vp-p 75 BNC
Video Loop Out
16 / 8 Channels. Composite video signal 1 Vp-p 75 BNC
Video Input
MPEG 4Video Compression Format
NTSC / PAL (switch able) Video System