User`s manual

31
2)
2)
Software Operation
Software Operation:
 Connect DVR with PC via RJ45 network line.


LAN Setting :
LAN Setting :
The default DVR IP is “192.168.1.10”, and default “username” and
“password” are both “admin”. Users should set PC IP address as
“IP:192.168.1.
XXX
XXX (1~255, except 10)” (in order to let the PC and DVR
under the same domain).
 Click twice to enter login page.
Key in IP (192.168.1.10), username (admin), password (admin) into the
login page. After connect to the DVR with local LAN, users could modify the
network setting in DVR or in system config of the licensed software AP.


Network Type ~ Static IP :
Network Type ~ Static IP :
Set the network information in the DVR menu (Section 5.13) or in System
Config of the licensed software AP (P.36).
Network Type ~ Dynamic IP (DHCP and PPPOE) :
Network Type ~ Dynamic IP (DHCP and PPPOE) :
Set the Network information in System Config of the licensed software AP.
For detailed DHCP and PPPOE setting, please refer to P.36 and P.37.
 LOGIN AP Icon Explanation.
Address Book:
Address Book: You can press
this button to add a new IP
into the IP Address Book
or choose any preset IP
address to access the Video
Server.
Search:
Search: Search available
DVR IP address in local area
network and modify the
network setting of the DVR.
Player:
Player: You can press this
button to access and play the
recorded files saved in your PC.
Copy:
Copy: You can press this
button to copy all the software
installation files, so you could
keep all the settings of video
web server for next software
installation on other PC.
 After setup the network information, click twice to enter login page.
Key in “Username”, “ Password”, and “IP” (Static IP) or “Host name”
(Dynamic IP). And then click the green button to connect.
NOTE: The version of the licensed software will shown on the login page.