User`s manual

24
5.12 ADVANCE MENU ___SYSTEM
5.12 ADVANCE MENU ___SYSTEM
Move the cursor to the “SYSTEM”, and press ”ENTER”, then the screen will show the
following options.
SYSTEM
SYSTEM
SERIAL TYPE RS - 485
BAUD RATE 02400
HOST ID 003
IR ON
PASSWORD 0000
RESET DEFAULT RESET
CLEAR HDD MASTER
UPGRADE NO
R.E.T.R. (MIN) 3
AUTO KEYLOCK NEVER
LANGUAGE ENGLISH
VERSION 1026-08-G6-04-V354-07
VIDEO FORMAT NTSC
1) SERIAL TYPE:
Press “ENTER” or “＋” or “－” button to set the control serial type (RS-485, RS-
232) of DVR.
2) BAUD RATE:
Press “ENTER” or “＋” or “－” button to set the BAUD RATE of DVR
(2400, 9600, 19200, 57600).
3) HOST ID:
Press “ENTER” or “＋” or “－” button to set the ID of DVR (0 ~ 255).
4) IR:
Press “ENTER” or “＋” or “－” button to set the IR function on / off.
5) PASSWORD:
Press “ENTER” or “＋” or “－” button to set the password for accessing DVR.
6) RESET DEFAULT:
Press “ENTER”, and select “YES” to confirm or “NO” to chancel.
7) CLEAR HDD:
Press “ENTER”, and “YES” to confirm clear HDD or “NO” to chancel.
In this function, you can press “＋” or “－” to select the HDD MASTER HDD,
SLAVE HDD or DISK ARRAY) which you plan to clear.
8) UPGRADE:
Press “ENTER”, and select “YES” to confirm upgrade or “NO” to chancel.
9) R.E.T.R. (MIN):
Set R.E.T.R. activated time (3, 5, 10 minutes after confirm the setting).
*
R.E.T.R. activate
R.E.T.R. activate ~ Press “Menu” + “－” buttons on the front panel.
When the R.E.T.R. is on, a message “R.E.T.R. ON” will be shown on the screen
(in red text).
*
R.E.T.R. off
R.E.T.R. off ~ Press any key (except “SHIFT” and “POWER” buttons)
and enter the password.
10) AUTO KEYLOCK
:
Set the auto key lock function (Never / 10 sec / 30 sec / 60 sec).