User`s manual

5.9 ADVANCE MENU ___DISPLAY

Move the cursor to the “DISPLAY”, and press ”ENTER”, then the screen will show the

following options.

DISPLAY

TITLE DISPLAY ON

DATE DISPLAY ON

HDD INFO ON

LOSS SCREEN BLUE

PLAYBACK INFO NORMAL

DWELL DURATION (SEC) 2

DE-INTERLACE ON

1) TITLE DISPLAY:

Turn the channel title display on / off.

2) DATE DISPLAY:

Turn the date display on / off.

3) HDD INFO”

Turn the display information of internal HDD on / off.

4) LOSS SCREEN”

Set the color of video loss screen (Blue or Black)

5) PLAYBACK INFO:

Set the position where playback information will be indicated (center or normal (on

the button of left-hand side of the screen)).

6) TS

The sensitivity towards how long the object gets triggered. The smaller the

value is, the higher sensitivity for motion detection.

The highest sensitivity setting is 00, and the lowest sensitivity setting is 15.

The default setting is 02.

7) RE :

The value of RE is a reference for detection. The default value is 10, which

means DVR will compare 10 continuous images at one time according to the

sensitivity of LS, SS, TS simultaneously. Therefore the bigger the value is, the

higher sensitivity for motion detection.

8) ALARM:

Select LOW / HIGH for the alarm polarity. The default alarm value is OFF.

9) UP / DOWN:

Select “UP” to go to the previous page; Select “DOWN” to go the next page.

Targets set in the AREA.