User`s manual

INSTALLATION AND CONNECTION
INSTALLATION AND CONNECTION
2.1 PHYSICAL CONNECTION
2.1 PHYSICAL CONNECTION
8
1) Install HDDs:
The HDDs must be installed before the DVR is turned on.
2) Connect cameras.
3) Connect monitors.
4) Connect the external devices.
5) Connect power.
NOTE: Please refer to Appendix #1 for HDD installation instructions.
NOTE: Please refer to Appendix#2 for pin configurations of the external I/O port .
Connecting all the devices to construct a surveillance system, as shown below.
(Take 16 channels as an example.)
(Take 16 channels as an example.)