User`s manual

5
10) “CH1 ”“CH2 ”“CH3 ”“CH4 ”:
Press “1 ”“2 ”“3 ”“4 ” buttons to select the channel to display.
11) “REC”:
Press “REC” button to activate the manual recording.
12) “ “ or “PLAY”:
Press this button to playback the recorded data.
13) “
UP / PAUSE , DOWN / STOP, LEFT / FAST REWIND, RIGHT / FAST FORWARD“:
Press “▲▼
◄►“ to move the cursor up / down / left / right.
Under the playback mode, press “ “ button to pause playback.
Under the playback mode, press “ ■ “ button to stop playback.
Under the playback mode, press “►►“ button to fast forward.
Under the playback mode, press “◄◄“ button to fast rewind.
14) “ ” or “ ” :
Press these two buttons to select live or playback sounds of the audio channels.
15) “ ” or “ ” :
Press these two buttons at the same time to enter / exit the PTZ control mode.
In the PTZ control mode,
* Zoom in : Press "＋" button
* Zoom out: Press "－" button
* Adjust PTZ angle: Press "UP, DOWN, LEFT, RIGHT" buttons
16) Switch to PAL System:
Press “ “ or “Power” button on the DVR front panel to shutdown. Then, press
and hold “►“ first, and press “ “ or “Power” to switch to PAL system.
(Press the buttons until the monitor shows video images)
Switch to NTSC System:
Press “ “ or “Power” button on the DVR front panel to shutdown. Then, press
and hold “◄“ first, and press “ “ or “Power” to switch to NTSC system.
(Press the buttons until the monitor shows video images)
Note:
Note: Only Model 1 & 2 & 5 need to be manually switched between PAL and NTSC
systems. Model 3 & 4 will automatically detect PAL/NTSC system.
17) Press “MENU” + “ENTER” buttons on the DVR front panel to lock keys and to log in
another username.
18) For Model 1, press “ ” buttons at the same time to open / close the CD Writer.
SLOW
ZOOM
AUDIO
SEQ.
P.T.Z