User`s manual

1.3 SPECIFICATION
1.3 SPECIFICATION
YESNO
R.E.T.R. (Remote Event
Trigger Recording)
2 audio inputs,
1 audio output
(Mono)
Frame: MPEG 4 ;
CIF: MPEG4
Model 2 Model 5Model 3 Model 4
YESMulti-language OSD
Support USB 1.1/ 2.0 flash drive
Backup Device
USB Interface
Pre-alarm Recording
Motion Detect Sensitivity
Motion Detection Area
Audio I/O
Refresh Rate
Watermark
Recording Mode
HDD Quick Cleaning
Hard Disk Storage
Image Quality Setting
Adjustable Recording
Speed
Maximum Recording Rate
Video Output
Video Loop Out
Video Input
Video Compression
Format
Video System
Frame: MJPEG ;
CIF: MPEG4
1 audio input,
1 audio output
(Mono)
NO
Model 1
YES
Support USB 1.1/ 2.0 flash drive
MODEL 1 and MODEL 5: Support USB 1.1/ 2.0 flash drive, CD writer and network remote backup
MODEL 2 and MODEL 4: Support USB 1.1/ 2.0 flash drive and network remote backup
MODEL 3: Network remote backup
4 Channels. Composite video signal 1 Vp-p 75Ω BNC
YES (8MB)
4 adjustable variables with precise calculation for motion detection
16 × 12 grids per camera for all channels
2 audio inputs,
1 audio output (Mono)
120 IPS for NTSC / 100 IPS for PAL
Frame: 30, 15, 7, 3 IPS <NTSC> / 25, 12, 6, 3 IPS <PAL>
CIF: 120, 60, 30, 15 IPS <NTSC> / 100, 50, 25, 12 IPS <PAL>
Frame: 720 × 480 pixels with 30 IPS〈NTSC〉 /
720 × 576 pixels with 25 IPS 〈PAL〉
CIF: 352 × 240 pixels with 120 IPS〈NTSC〉/
352 × 288 pixels with 100 IPS 〈PAL〉
IDE type, ATA66, supported HDD ＊1 , support HDD capacity over 500GB
Best, High, Normal, and Basic
Manual／Timer／Motion／Alarm ／Remote
Quick clean up the “index system” of the recorded files.
500GB under 2 seconds
Main Monitor Output: Composite video signal 1 Vp-p 75
Ω BNC
Call Monitor Output: Composite video signal 1 Vp-p 75Ω BNC
4 Channels. Composite video signal 1 Vp-p 75Ω BNC
Frame: MPEG 4 ; CIF: MPEG4
NTSC / PAL (switchable)
2