User`s manual

DDNS
DDNS
DDNS APPLY EXAMPLE:
DDNS APPLY EXAMPLE:
 Go to a website which provide free DDNS services.
For example, “http://www.dyndns.org”.
 Create an account in DynDNS.
 After creating one account, users will receive an confirmation e-mail within a few minutes.
To complete the registration, please follow the instructions received.
Users must complete these steps within 48 hours to complete the registration.
If the confirmation e-mail was not received within an hour, request “password reset”
(http://www.dyndns.org/account/resetpass/).
 Use the DDNS username and password to login the DynDNS.


Create Hostname:
Create Hostname:
Login → “Account” → “My Service” → “Add Host Services” → “Add Dynamic
DNS Host” → Enter and choose the hostname → Click on “Add Host” → DDNS
Hostname created.
YourHostName
YourHostName
1
1
2
2
3
3
4
4
5
5
38
c DDNS is a service for transforming the
dynamic IP corresponding to a specific
“Hostname”.
d
DDNS Apply:
DDNS Apply:
Go to a website which provides free
DDNS services and apply a “Hostname”.
See the example below.
e
Enable the DDNS function
Enable the DDNS function
:
User Name: Enter your DDNS user name.
Password: Enter your DDNS password.
Domain: Enter your host name.
System Name: Choose the DDNS system
name you use from the drop-down list.
After setting, press “APPLY” to confirm.
Note:
Note:
If the dial-up static IP is provided by your ISP, simply choose “Enable” and do not
need to enter the information described above.
f
Auto:
Auto:
When using DHCP network connection, the "AUTO" check box will appear on this window.
The system will automatically get DNS information from the Internet if this check box is
selected.