User manual

efgis.com

Operation Manual

4.3.3 Using the DSG1 settings applications

At startup, the DSG1 settings application displays a “DSG1” button. When you click it, the

application starts looking for all DSG1 units connected on the network.

If several DSG1 units are found, the rst DSG1 found is selected by default. To select a dif-

ferent DSG1, choose another DSG1 from the dropdown menu next to the “DSG1” button.

If no DSG1 units are found, the system displays a special message (“No DSG1 found on the

network”). Make sure that:

• the DSG1 is connected to the network or laptop

• a DHCP server is available

• the IP address family of the DSG1 (displayed on the LCD screen) is reachable by

the computer

• no rewall is blocking UDP port 9051 (used by the DSG1 on rst connection)