SUPER CPAP POWER PACK USER’S GUIDE MODELS: C-150, C-222, C-444
SUPER CPAP POWER PACK YOUR CPAP MACHINE DOESN’T HAVE TO KEEP YOU FROM ENJOYING THE GREAT OUTDOORS...
TABLE OF CONTENTS CPAP POWER PACK FEATURES 1 PRODUCT SPECIFICATIONS 2 SAFETY WARNINGS 3 PACKING LIST 3 CONTROL BOARD PART IDENTIFICATION 4 CHARGING THE POWER PACK VIA A WALL OUTLET 4-5 THE POWER METER 5 POWER PACK OPERATION 6 LOCATING THE CORRECT UNIVERSAL CONNECTOR 7 OPERATION - POWER PACK WITH INVERTER 8 SINE WAVE INVERTER OPERATION 8-9 CHARGING THE POWER PACK VIA THE CIGARETTE LIGHTER SOCKET OF A VEHICLE 9-10 CPAP POWER PACK IMPORTANT NOTES 10-11
CPAP POWER PACK FEATURES SUPER CPAP POWER PACKS... THE MOST POWERFUL CPAP POWER SUPPLIES IN THE WORLD! Available in three different sizes and capacities. Includes soft side carrying case, AC Charger and DC Power Cord. Power gauge on Power Pack indicates remaining usage time. Power Pack does not have to be completely discharged before recharging.
-2- 5-6 hours *25-30 hours 6-7 hours *50-55 hours 6 months 4 lbs. 9.8” x 5.9” x 1.3” 6 months 9 lbs. 10 1/8” x 6 7/8” x 2 5/8” Power Pack run times vary depending upon several factors including device type, pressure setting & altitude. 6 months 3 lbs. 9.8” x 5.9” x 1.
WARNING - SAFETY FIRST The following safety warnings must be observed at all times: To prevent fire or shock hazard, do not expose the Power Pack to rain or moisture of any type. CAUTION: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. DECLARATION OF CONFORMITY: This class B digital device complies with part 15 of the FCC rule, EMC standard regulations En55022 Class B and Canadian ICES-003.
CONTROL BOARD PART IDENTIFICATION E A C A. DC IN/OUT JACK (A) C. TEST BUTTON E. POWER METER D B B. DC IN/OUT JACK (B) D. LOW POWER ALARM CHARGING THE POWER PACK CHARGING THE POWER PACK A VIA WALL OUTLET Connect the DC-out plug of the AC charger to the DC IN/OUT jack (A) of the Power Pack. Connect the power cord of the AC charger to a wall outlet. The red light of the charger lights up when charging begins. When the charger light turns green, normal charge is completed.
CHARGING THE POWER PACK After giving your Power Pack a complete charge please hold the test button down for up to 30 seconds to initialize the indicator lights. You should see up to four green LED lights come on. If a blinking red light comes on, this means your Power Pack is turned on. To shut off your Power Pack, hold down the test button until the lights go black. POWER METER THE POWER METER MAY BE ACTIVATED AFTER THE FIRST CPAP POWER PACK CHARGING.
SUPER CPAP POWER PACK OPERATION CONNECTING THE POWER PACK TO A CPAP MACHINE NOTE: PRODUCTS MANUFACTURED BY RESMED SHOULD NEVER BE POWERED VIA DC CONNECTIONS AS IT WILL RUIN THE DEVICE. ResMed products should only be connected via a Sine Wave Inverter. (see page 8) Connect DC Power Cord to the DC IN/OUT jack (B) on CPAP Power Pack. Connect the DC Power Cord to the DC in/out jack located on the CPAP machine.
LOCATING THE CORRECT UNIVERSAL CONNECTOR Locate the DC input port on the CPAP machine. Try to insert a connector tip to the DC input port on the CPAP machine and then gently try to plug the connector tip to the DC Power Cord. Test all of the connector tips. Create 2 different piles of tips.
OPERATION CONNECTING THE POWER PACK TO A CPAP MACHINE THAT DOES NOT HAVE A DC IN/OUT JACK If your CPAP machine does not have a DC in/out jack, you will need to use the 150 Watt or 225 Watt Sine Wave Inverter (sold separately) in addition to the Power Pack. NOTE: PRODUCTS MANUFACTURED BY RESMED SHOUD NEVER BE POWERED VIA DC CONNECTIONS AS IT WILL RUIN THE DEVICE. ResMed products should only be connected via a Sine Wave Inverter. 225 WATT SINE WAVE INVERTER Dimensions: 4.5” x 4.5” x 1.75” Weight: 1.
150 or 225 WATT SINE WAVE INVERTER OPERATION Push and hold the TEST button on the Power Pack for 30 seconds. Four green lights should illuminate on the front of the Power Pack. Push the ON/OFF button on your CPAP machine. Your CPAP machine should start functioning.
CHARGING THE POWER PACK VIA THE CIGARETTE LIGHTER SOCKET OF A VEHICLE Remove the cigarette lighter from the cigarette lighter socket in your vehicle. Plug the Inverter adapter cord into the cigarette lighter socket. Start your vehicle to begin the charging process. When the charging process is complete remove the adapter from the cigarette lighter socket. SUPER CPAP POWER PACK IMPORTANT NOTES DC adaptor included with Power Pack may not be compatible with your CPAP device.
SUPER CPAP POWER PACK IMPORTANT NOTES If you are unsure if the Super CPAP Power Pack will work with your machine, please call your machine’s manufacturer. A list of the most popular manufacturers’ contact information follows: DeVilbiss: Fisher & Paykel: Invacare: Puritan Bennett: Respironics: ResMed: 1-800-338-1988 1-800-707-5454 1-800-333-6900 1-800-635-5267 1-800-345-6443 1-800-424-0737 www.devilbisshealthcare.com www.fphcare.com www.invacare.com www.puritanbennet.com www.respironics.com www.
NOTES ______________________________________________________ _______________________________________________________ ________________________________________________________ _______________________________________________________ _______________________________________________________ ______________________________________________________ ______________________________________________________ _______________________________________________________ ______________________________________________________ _____
SUPER CPAP POWER PACK USER’S GUIDE - April 2010
