System information

Table 1-1. (continued)
Message Meaning
CANNOT READ
PIP. PIP cannot read the specified source. Reader cannot be implemented.
CANNOT WRITE
PIP. The destination specified in the PIP command is illegal. You probably
specified an input device as a destination.
Checksum error
PIP. A HEX record checksum error was encountered. The HEX record that
produced the error must be corrected, probably by recreating the HEX file.
CHECKSUM ERROR
LOAD ADDRESS hhhh
ERROR ADDRESS hhhh
BYTES READ:
h h h h :
LOAD. File contains incorrect data. Regenerate HEX file from the source.
Command Buffer Overflow
SUBMIT. The SUBMIT buffer allows up to 2048 characters in the input file.
Command too long
SUBMIT. A command in the SUBMIT file cannot exceed 125 characters.
\CORRECT ERROR, TYPE RETURN OR CTRL-Z
PIP. A HEX record checksum was encountered during the transfer of a HEX file.
The HEX file with the checksum error should be corrected, probably by recreating
the HEX file.
Appendix I : CP/M Error Messages CP/M Operating System Manual
I-5