Operation Manual

Introduction
12
Wireless
On / Off
Button
Push button for 3 seconds to Enable or Disable the wireless
signal.
Reboot
or Reset
Reboot - Press WPS and Wireless On/Off buttons together
for 5 seconds. The router will restart and boot again.
Reset – Press WPS and Wireless On/Off buttons together for
10 seconds.
All settings will be CLEARED and restored to factory defaults.
Rear Panel
Rear Panel
Power port
Connect the supplied power adapter here.
WAN port
(10/100BaseT)
Connect the DSL or Cable Modem here. If your modem came
with a cable, use the supplied cable. Otherwise, use a standard
LAN cable.
10/100BaseT
LAN connec-
tions
Use standard LAN cables (RJ45 connectors) to connect your
PCs to these ports.