Owners manual

Network Camera User’s Manual
51/66
week to perform the application.
(3) “Start day” and “Start time” as the start timing the time. “End day” and
“End time” as the end timing the time
Trigger mode
(1) “Video motion detection” Enable/Disable video motion application
(2) “Periodically” This option allows the Network Camera to trigger
periodically for every other defined minute.
(3) “Video Tracking” is able to track dynamic objects within screen video.
-- “Tracking level” 1 to 5 level the lower the number the more sensitive.
parameters
(1) “Motion parameters”
Higher sensitivity and small threshold will allow easier motion detection.
(2) “Period parameters” This option allows the Network Camera to trigger
periodically for every other defined seconds. Up to 999 seconds are allowed.
Media mode
There are four choices of media types available: “Snapshot”, “Message”
“Record(Motion Detection only)” and “System log”.
Snapshot & Record file setting
You can setting the file name, and enable or disable to add the date and time
on file name.
Response mode
There are four choices of server types available: Email, FTP, NAS, and SD Card
storage. Select the item to display the detailed configuration options.
(1)“Email”
-- “Email security mode” : If your SMTP server requires a secure connection
(SSL or TLS), check This server requires a secure connection (SSL or TLS).
-- “Sender email” address: Enter the email address of the sender.
-- “Recipient email” address: Enter the email address of the recipient.
-- “Server address” Enter the domain name or IP address of the email
server.
--“User name” Enter the user name of the email account if necessary.
--“Password” Enter the password of the email account if necessary
--“Server port” The default mail server port is set to 25. You can also
manually set another port.
(2)”FTP”
-- “Server address” Enter the domain name or IP address of the FTP server.
-- “Server port” By default, the FTP server port is set to 21.
-- “User name” Enter the login name of the FTP account
-- “Password” Enter the password of the FTP account.
-- “FTP folder name” Enter the folder where the media file will be placed. If
the folder name does not exist, the Network Camera will create one on the FTP
server.
(3)”HTTP ”
-- “URL” Enter the URL of the HTTP server.
-- “User account” Enter the user name if necessary.