Technical data

102
13
13
5
5
5
Example MW MaxxScreen 27
Mounting installation drawings and installation service are available for
all formats on request
Width
Width + 26 cm
Height
Diagonal
Projections in over-sized rooms such
as exhibition halls, congress centres and
lecture halls require correspondingly
large projections screens in order to
achieve a professional and attractive
presentation.
The MW MaxxScreen has been designed for
this exact application area and can be
produced up to a size of 12 m wide and
7 m high as standard with a seamless
projection surface.
l High quality, sturdy square steel casing in
1 mm sheet steel
l Casing colour: white, RAL 9010
l Ceiling mounting planned as standard
l Wall mounting up to and including a
housing diameter of 20/20 cm on request
at an additional charge, please consider
this when ordering
l Mounting set for installation in suspended
ceilings available at an additional charge
l Installation frame with inspection flap,
continuous riveted rim available upon
request at an additional charge
l Maintenance-free special winding shaft,
low-noise and oscillation-free
l Stepless height adjustment of the screen
surface
Screen surface
l Front projection, type D
l DIN 19045 gain factor, apprx. 1.1
Projection surface type S and
rear-projection upon request.
The projection surfaces are possible in
3 different designs
l A seamless woven fabric with
good flatness
l A fibreglass reinforced support with
very good, even flatness
l Design with screen surface on foil base
with tab tension for the best flatness
More information is available on the
projection surfaces on request.
The MW MaxxScreen corresponds with the
highest safety requirements according to
DIN 19045
l The projection surface is attached to
the winding shaft with an ultrastrong
multi-component adhesive
l Construction design according to DIN 19045, 1-4
l Safety technology according to DIN 19045, 5
l Maintenance-free geared motor with
automatic limit shut-down, overheat
protection and right drive
Accessories
MW mounting set for installation in
suspended ceilings
On request
MW wall mount
For MaxxScreen with housing diameter
15/15 cm and 20/20 cm
On request
MW remote control
Code No. 184931
Housing Finish
Different dimensions and special
formats available.
We recommend requesting professional
advice before the purchasing and
assembling a MaxxScreen.
Stationary Large Screens
Subject to technical modifications and errors. All technical data and indications of format, weight, brightness or size are approximate values.
MW MaxxScreen – for projections in gigantic dimensions