Technical data

98
66
Width
Height
Diagonal
Stationary Roller Screens
MW Rollux 2 – pull down,
tilt and pivot in one step
MW Rollux 2
l Distortion-free projection using
INC (inclination) technology
l Optimal flatness thanks to the scissor
mechanism on the back (therefore
stepwise height adjustment)
l Wall or ceiling mounting, single mounting
point (central)
l Octagonal sheet steel casing
l Casing colour: white, RAL 9010
With optionally available accessories,
Rollux 2 can:
l Tilt from 0° to 15°
l Swivel steplessly left-to-right
With wall/
ceiling spacer
With MW wall/ceiling spacer
and MW swivel head, tilted
Screen surface
l Front projection, type D
l DIN 19045 gain factor, approx. 1.2
l Matt white, foil base
l Back: black, virtually opaque
30– 50 cm
Back view:
with spacer and
swivel head, tilted
Subject to technical modifications and errors. All technical data and indications of format, weight, brightness or size are approximate values.
MW Rollux 2
External dimensions Casing Ø Diagonal Weight Code No.
W/H cm/inch net kg
150/150 cm 5.5 cm 212/84 10.0 13060
180/180 cm 7.2 cm 255/100 12.5 13061
200/200 cm 7.2 cm 283/111 14.0 13062
Instructions for optimum assembly
Desired mounting Required accessories Code No.
Ceiling mounting no accessories required
Ceiling mounting + tiltable 0°-15° no accessories required
(just appropriate
distance from wall) –
Ceiling mounting + stepless swivel swivel head + appropriate
distance from wall 13064
Wall mounting no accessories required –
Wall mounting + tiltable 0° - 15° spacer 30-50 cm 13063
Wall mounting + steplessly tiltable spacer 30-50 cm
+ swivel head 13063+13064
Accessories
MW Wall/ceiling spacer
Distance to wall or ceiling can be set to 30,
40 and 50 cm. For installation in suspended
ceilings and for tilting to eliminate the
keystone effect if screen is wall-mounted
Code No. 13063
MW swivel head
Enables screen to be swivelled left or right
(when wall-mounted only in combination
with MW wall/ceiling spacer)
Code No. 13064