Instruction manual

17
06
Operation Guide
Connect to the power supply, and turn the switch to “I” position. The chair is now in idle
mode. During idle mode, there are only seven funtions: ON/OFF, Foot Extend, Pause,
Recline, Sit Up, Lift Leg or Recline Leg that can be operated.
CONTROL BUTTONS FOR THE MASSAGE CHAIR
1. ON/OFF
The Start/Stop Control Button
- Press once on this button and the backlight of the Remote Control will start blinking: the
chair is in idle mode. Press any massage function button to begin massage functions on
the chair. This will also start the Timer.
- Press this button again to stop all massage functions, the massage rollers will return to
its original position.
2/3. Recline/Sit Up
Angle Adjustment Control Button for Massage Chair
- These two control buttons can adjust the Reclining and Sit Up angle respectively. Press
once on the Reclining or Sit Up control button to adjust the Backrest and Footrest to a
comfortable position. - Press any of the control button again to adjust for Reclining, Sit Up,
Lift Leg or Recline Leg, to confirm the position.
4/5. Lift Leg/Recline Leg
Angle Adjustment Control Button for Calves
- These two control buttons can adjust massage angle on the Legrest.
- Press once on the Lift Leg or Recline Leg control button, and the Legrest will adjust itself
to a comfortable position. Press any of the control buttons again for Reclining, Sit Up, Lift
Leg or Recline Leg to confirm the position.
Note: The adjustment angle functions will be activated by sustained pressing of the button
for 2 seconds.