Specifications

Chapter 5: Configuring Equalizer Operation
62 Equalizer Installation and Administration Guide
Backing Up Your Configuration
To back up your current configuration to a file, follow these steps:
1. Log into the Equalizer Administration Interface in Edit mode.
2. Select Equalizer > Global Configuration from the main menu bar; then select menu >
Backup/Restore Configuration from the modify system parameters screen. The backup/
restore screen (see Figure 34 on page 62) appears in the right frame.
Figure34 BackingupyourEqualizerconfiguration
3. Click the backup button.
4. When prompted, specify the location where you want to save the configuration file; then click
OK.
Restoring a Saved Configuration
To restore a saved configuration, follow these steps:
1. Log into the Equalizer Administration Interface in Edit mode.
2. Select Equalizer > Global Configuration from the main menu bar; then select menu >
Backup/Restore Configuration from the modify system parameters screen. The backup/
restore screen (see Figure 34 on page 62) appears in the right frame.
3. Click the restore button.
Figure35 Restoringasavedconfiguration
4. Click Browse... to locate and select the configuration file that you want to use to restore the
Equalizer configuration.