Specifications
Chapter 5: Configuring Equalizer Operation
58 Equalizer Installation and Administration Guide
3. Click on the Add icon . The add static route screen appears:
Figure32 Theaddstaticroutescreen
4. Enter the parameters for the route, and select commit. You are returned to the static routes
screen, which now displays the route you added.
Modifying a Static Route
1. Log into the Equalizer Administration Interface.
2. Select Equalizer > Global Configuration from the main menu bar; then select menu >
Manage Static Routes from the modify system parameters screen. The static routes screen
appears in the right frame.
3. Highlight the route you want to change in the table and select the Edit icon . The edit static
route screen is displayed:
4. Edit the values shown as needed and select commit to submit your changes. You are returned to
the static routes screen, which now displays the updated route.
Deleting a Static Route
1. Log into the Equalizer Administration Interface.
2. Select Equalizer > Global Configuration from the main menu bar; then select menu >
Manage Static Routes from the modify system parameters screen. The static routes screen
appears in the right frame.
3. Highlight the route you want to delete in the table and select the Delete icon . A
confirmation screen appears.
Network
The IP address for the host or subnet. Can be spec-
ified as a Classless Internet Domain Routing (CIDR)
address to specify a netmask; for example:
192.168.1.0/24.
Gateway
The IP address of the gateway used to reach the
host or subnet.