Specifications

Modifying System Parameters
Equalizer Installation and Administration Guide 43
Modifying System Parameters
To view and modify the Equalizer’s system parameters, follow these steps:
1. Log into the Equalizer Administration Interface in Edit mode.
2. Select Equalizer > Global Configuration from the main menu bar; Equalizer displays the
modify system parameters screen in the right frame; see Figure 22 on page 43, Figure 23 on
page 45, and Figure 24 on page 46.
3. Change the appropriate fields.
4. Click the commit button.
The modify system parameters screen displays the following parameter values that affect
Equalizer’s operation:
Figure22 Themodifysystemparametersscreen(parametervalues)
• sequence is the Equalizer-assigned number for the current configuration. This number is
assigned by Equalizer and cannot be edited. It can be useful in a failover configuration to
determine if the latest configuration has been transferred to the default backup Equalizer when
a change is made to the configuration on the default primary Equalizer.