Specifications

Chapter 5: Configuring Equalizer Operation
42 Equalizer Installation and Administration Guide
1. Follow Steps 1 through 3 of the procedure above.
2. Select the Offline License tab on the license status screen; the license status screen now
appears as shown below:
3. Select create license request file and save the file to an appropriate location on your local
system.
4. Select the [e-mail] link to open your browser’s mail client, or open your
email client manually and specify this address in the To: field of a new mail message. Specify
license request in the Subject field, and attach the license request file you saved in the
previous step. Send the email.
5. Once Coyote Point processes your request, you will receive a signed license file in a return
email from Coyote Point. Save the licensing file you receive from Coyote Point to an
appropriate location on your local system.
6. Select install signed licensed file and use the browse box to select the signed license file you
saved in the previous step.
7. Equalizer installs the license and asks you if you want to reboot to apply the license. Select Ye s
to reboot.
After the system comes back up, there should be no unlicensed error in the left frame. If your
license includes the ability to use Envoy, the Equalizer Status screen (select Equalizer in the left
frame) should show Envoy geographic load balancing enabled.