Specifications
Performing Basic Equalizer Configuration
Equalizer Installation and Administration Guide 23
can use Ctrl-n to select the next menu item or Ctrl-p to select the previous menu item. Press
the Tab key to highlight one of the menu actions (such as Select or Cancel) displayed at the
bottom of the window. Then press Enter to continue.
Continue with “Configuring the Network Parameters” on page 23.
Configuring the Network Parameters
To configure the Hostname, Network Interfaces, Default Router, and DNS, use the following steps.
Even if you are using your Equalizer in a single network configuration, you need to enter
information for both the external and internal (server) interfaces.
1. Once you log into Equalizer as shown in the previous section, the system displays the Equalizer
Configuration Menu:
Figure12 EqualizerConfigurationUtility:MainMenu
2. In the Equalizer Configuration Menu window, select option 1, Interfaces, and press Enter.
Equalizer displays the Configure network interfaces window (see Figure 13).
Figure13 EqualizerConfigurationUtility:SampleInterfaces