Specifications

Browsing Equalizer Configurations using SNMP
Equalizer Installation and Administration Guide 121
Siblings
The main object that describes siblings is cpsSysEqSiblings. This describes any siblings for failover
configurations.
Configuration and Status
The main object, cpsSysEqualizer, is the largest object in the MIB and contains many sub-objects.
These sub-objects include:
eqStaticCfg - This group contains the static configuration information such as the name of the
Equalizer, the software version, internal and external IP addresses and netmasks, default gateway,
failover alias, etc.
eqDynamicCfg - This group consists of several sub-groups and contains no variables of its own. The
sub-groups are:
eqGlobalDynamicCfg - This group contains a number of global configuration items including
failover status, whether or not outbound NAT is enabled, etc.
eqL4DynamicCfg - This group contains configuration variables specific to Layer 4 load
balancing, the state of passive FTP, idle timeout, stale timeout, etc.
eqL7DynamicCfg - This group contains configuration variables specific to Layer 7 load
balancing, including send and receive buffer sizes, the state of SSL encryption, etc.
eqStatus - This group consists of two sub-groups and contains no variables of it's own. The sub-
groups are.
eqL4Status - This group contains Layer 4 statistics such as number of connections processed,
peak connections, and idle timeout count.
eqL7Status - This group contains L7 statistics such as active connections, peak connections and
total number of connections.
Clusters
The main object that describes clusters is cpsSysEqClusters. This consists of a set of tables
describing the configuration of, and operational statistics for, all of the virtual clusters configured
within the system.
Servers
The main object that describes servers is cpsSysEqServers. This consists of a set of tables describing
the configuration of, and operational statistics for, all of the servers configured within each virtual
cluster within the system.
Events
The main object that describes Equalizer events is cpsSysEqEvents. This contains variables that
control whether or not traps are globally enabled and enable flags for each of the individual trap
events.