Specifications

Setting Maximum Connections per Server
Equalizer Installation and Administration Guide 95
a. Create a new virtual cluster: select Add > Virtual Cluster from the main menu bar. The
add cluster screen appears in the right frame.
b. Modify an existing virtual cluster: select the cluster name in the left frame, and then select
menu > Change Cluster Parameters in the right frame. The modify cluster screen
appears in the right frame.
3. If it is not already checked, select the advanced check box in the flags section of the screen in
the right frame. The max_conn field is near the top of the right-hand screen, as shown in the
following figure:
4. Set max_conn to a positive integer between 0 and 65535. A zero (the default) indicates that
there is no maximum connection limit.
5. Set other parameters and flags for the cluster as desired; see Chapter 6, “Administering Virtual
Clusters”, in the Installation and Administration Guide, for more details.
6. Select commit to create or modify the cluster.
7. If you modified an existing cluster with servers already defined, you will need to modify each
server to use the new maximum connections limit.
Setting Maximum Connections on a Server:
1. Log into the Equalizer Administration Interface in Edit mode.
2. Do one of the following:
a. Create a new server: select a cluster name in the left frame, and then select menu > Add
Server. The add server screen appears in the right frame.
b. Modify an existing server: select the server name in the left frame, and then select menu >
Change Server Parameters in the right frame. The modify server screen appears in the
right frame.