Owner Manual

14
1. Simply remove the cooking grate and then remove the four bolts from the lower hood assembly.
Once you back these four bolts all the way out (save these for the last step), the top portion of the
grill will become completely free from the oven rack. Remove the grill from the oven rack.
2. While the grill is removed from the oven rack, remove the four black feet and keep the bolts and
washers for use in a future step.
3. There are two screws on each side of the oven rack holding the handles in place. Remove these
screws. Four total. Using those screws, install the side shelves that came with the pedestal stand to
the oven rack.
4. Place middle pole on a flat surface in the vertical position (remove the four bolts installed on the
middle pole).
5. Next, place pedestal base upside down on top of the middle pole. Install the four bolts from step
#4 securely to the pedestal base.
6. Once all four bolts are secured, flip the pedestal over to where it is standing up. Remove the bolts
on the middle pole, place the frame on the middle pole and use the bolts to secure frame tightly to
pole.
7. Using the four black feet from #2, secure the oven rack to the frame.
8. Place the entire grill into oven rack. Using the bolts from #1. Install bolts in lower hood assembly.
1. To make the built-in version of the C1EL120SM, you simply have to remove the cooking grate and
then remove the four bolts holding the lower hood assembly in place. Once you back these four
bolts all the way out, the top portion of the grill will come completely away from the oven rack.
a. Be careful, once you release these four bolts the hood will also want to come back as it
is anchored to the frame you are releasing.
2. Pull the plug and electrical cord out from the oven rack
3. Once you have that done, you can put the four bolts back into the oven rack and now the grill will
be ready for built-in install.
Assembly with the Pedestal Stand
Assembly of the Built-In Version