User's Manual

CDR-915L OEM DATA RADIO MODULE
___________________________________________________________________________________________
Revision M INTEGRATOR’S GUIDE
11
The On-Sync mode allows the installer to look only at radio transmissions for
CDR-915L radio. When packets are received, the transmission’s current
and maximum signal strength is displayed along with the packets’ source
group code and address. This allows the installer to ensure there is
adequate signal strength with enough fade margin to guarantee reliable
operation. Signals in the green area are considered very reliable, the yellow
area are marginally reliable and the red area are considered not reliable.
The graph will display information for a maximum of 16 radio addresses. As
new addresses are received, they will replace the oldest ones in the graph.
The signal received last is indicated by a cross hatch in the bar. Clicking on
the Stop button will reset the graph information.
On-Sync Signal Monitoring