User's Manual

DR-915L OEM DATA RADIO MODULE
___________________________________________________________________________________________
Revision I INTEGRATOR’S GUIDE
11
The On-Sync mode allows the installer to look only at radio transmissions for DR-915L
radio. When packets are received, the transmission’s current and maximum signal
strength is displayed along with the packets’ source group code and address. This
allows the installer to ensure there is adequate signal strength with enough fade
margin to guarantee reliable operation. Signals in the green area are considered very
reliable, the yellow area are marginally reliable and the red area are considered not
reliable.
The graph will display information for a maximum of 16 radio addresses. As new
addresses are received, they will replace the oldest ones in the graph. The signal
received last is indicated by a cross hatch in the bar. Clicking on the Stop button will
reset the graph information.
On-Sync Signal Monitoring