Specifications

2.4. Operating mode

a) CTX300 with display

- Remove the 4 screws (Ref. 1 in Fig. 1)

- Remove the cover (Ref. 2 in Fig. 1)

- Gently remove the screw (Ref. 3 in Fig. 2)

- Completely remove the screw (Ref. 4 in Fig. 2)

- Turn the display circuit as shown above (Ref. 5 in Fig. 3)

- Connect the cable (see 2-3: Connections for the various types of sensors) to the connector (Ref. 6,

Fig. 3)

- Return the display circuit to its original position and replace the cover

b) CEX 300 and CTX 300 without display

- Lift the cover (Ref. 1 in Fig. 1)

- Remove the cover (Ref. 2 in Fig. 2)

and proceed to wire the sensor according to the terminal location

FIG. 1

Ref. 2

Ref. 1

FIG 2

Rep3

Rep4

FIG. 3

Ref. 6

FIG. 2

Ref. 3

Ref. 4

Ref.