Specifications

26
2. Replacing a sensor
Sensors must be replaced:
- when calibration is no longer possible (no sensitivity)
- during preventative maintenance, the replacement sensor should be identical to the original
sensor (same gas, same range)
After a sensor has been replaced, a calibration or test (for pre-calibrated sensors) must be
conducted.
3. Disposal
For the preservation, protection and improvement of environmental quality, and
for the protection of human health and the prudent and rational utilization of
natural resources, the CEX/CTX 300 must be disposed of separately from
electronic equipment and cannot be disposed of with normal household waste.
The user therefore has an obligation to separate the CEX/CTX 300 sensor from
other waste to ensure that it is recycled safely for the environment. For further
details on existing collection sites, contact the local administration or seller of the
product.
4. Replacement Parts List
4.1. CEX 300-type Combustible Sensor
DESCRIPTION REF
CEX 300 standard:
CEX 300 with cable glands for armored cable
WCE30FD
WCE30FA
TOOLS
CEX 300 TOOL KIT
6147867
ACCESSORIES
MOUNTING BRACE + bolts
(CEX 300 ceiling mount)
6322420
GAS COLLECTOR (INOX)
6323607