Specifications

11
III. POWERING UP AND USE
1 Powering up
The sensor turns on when connected to a power supply. If the sensor has a display, the green LED
will be lit (Ref 1 in Fig 4) and a value will appear on the display screen (Ref. 2 in Fig 4).
Fig. 4
In case of a problem, verify that the maintenance switch (Ref. 1), located on the main circuit is in
the “MES” (measure) position.
Ref. 2
Ref. 1
Fig. 6
Ref. 1
CIRCUITBOARD CTX 300 SC
Ref. 1
Fig. 5
CIRCUITBOARD CTX 300
CAL
MEAS