User`s guide

28
• Using the Cox remote control, press [ SETTINGS ] twice to get to General Settings.
• Use [
] to highlight SET: A-C OUTLET.
• Use
[ s ] or [ t ] to select ON WITH SET TOP.
• Plug the television back into the electrical outlet on the digital receiver.
• You may now turn your television on and off with either [ CABLE ] or [ TV ].
No Sound
• Make sure the volume is turned up.
• Verify that [ MUTE ] is not in use from the TV or the digital receiver.
• Make sure that the television and the digital receiver are plugged into an active
electrical outlet.
• If the electrical outlet is controlled by a wall switch, make sure the switch is in the
ON position.
• Make sure that all coaxial cables are properly connected and that all connections
are tight.
• Make sure the power light on the digital receiver is on (indicated by a green light on
the front of the digital receiver).
• Make sure the power to the TV is on.
• If the system setup includes a VCR, DVD and/or stereo, make sure they are properly
connected to the digital receiver.
• Make sure the TV is tuned to the proper output channel — channel 4 or channel 3.
Cox Business TV Digital Receiver Does Not Power On
• Make sure that the digital receiver is plugged into an active electrical outlet.
• Make sure that all cables are properly connected and that all connections are tight.
• If the electrical outlet is controlled by a wall switch, make sure the switch is in the
ON position.
CBS100061_CBTV-UG_SciAtl_Pages 28 10/15/10 2:21 PM