User Guide ver. 1.
+ Copyright Notice Thank you for purchasing COWON product. General + COWON is the trademark of COWON SYSTEMS Inc. + All contents in this manual are protected under copyright law. + All the other product(s) and service(s) listed in this manual are registered trademark and service of the corresponding copyright owner(s). + All rights to this program are reserved by COWON SYSTEMS Inc. and protected under copyright law.
Before Using This Product + Usage Precautions As these precautions are provided for the correct use of the product as well as user safety, be sure to familiarize yourself with them. The company will not be responsible for any accident that may occur due to the failure to heed these precautions. +D o not use this product for other purposes than those described in this manual. +D o not attempt to disassemble the product.
Before Using This Product + Product Overview Enjoy high-quality stereo music with COWON SP2. SP2 is able to wirelessly connect to a smart phone or Bluetooth transmitter via Bluetooth. + COWON SP2 plays music close to the quality of the original CD's by supporting the apt-X codec. + COWON SP2 supports NFC(Near Field Communication). It can quickly connect with Bluetooth devices supporting NFC function. + COWON SP2 is a Bluetooth stereo speaker. It supports the following Bluetooth profiles.
Before Using This Product + Names of Parts and Functions 1 5 2 6 3 4 7 8 ON OFF AUX 12 10 9 11 22 1 Volume Up(+) 7 Microphone 2 Previous Song / Fast Rewind 8 LED Status Indicator 3 Play / Pause, Pairing 9 ON / OFF Button : Power Switch 4 Volume Down(-) 10 AUX-IN Port 5 Next Song / Fast Forward 11 USB Port 6 NFC Sensor 12 USB Cable COWON SP2
Before Using This Product + Charging 1. Plug the USB cable into the USB port of a PC. 2. LED indicators display the battery charge status. - Red light on : Charging - Red light off : Finish charging 3. It takes about 3 hours to finish charging. - COWON SP2 can also be charged by a Micro USB smart phone charger. - For normal charge, please turn off SP2. - When charging SP2 for the first time or if SP2 has not been charged for an extended time, fully charge the battery before use.
Using This Product + Pairing and Connecting with Mobile Phone ■ Pairing SP2 with a Bluetooth mobile phone via NFC COWON SP2 supports NFC function. It can quickly connect with Bluetooth mobile phone via NFC. Touch Touch Touch Touch Touch 1. Touch Settings button into setting interface. 2. Activate Bluetooth function. 3. Touch More settings interface to activate NFC function. 4. Please turn on SP2 first. Keep the NFC chip of a mobile phone and the speaker within 1 centimeter. 5.
Using This Product + Pairing and Connecting with Mobile Phone -T he screen of a mobile phone must be in unlocked mode during pairing via NFC. - The NFC chip of a mobile phone and SP2 must be in 1 centimeter during pairing. - The pairing procedures are subject to different models of mobile phones. Please refer to the user manual of your mobile phone for further information. - Please refer to 'Pairing SP2 with Bluetooth Mobile Phone via Bluetooth' below when mobile phones are not NFC enabled.
Using This Product 3. When SP2 requests to enter a PIN No., the transmitter will response '0000' automatically. 4. After successful pairing and connecting, blue LED of SP2 flashes twice every 4 seconds. -K eep SP2 and a Bluetooth transmitter within 1 meter when pairing - The pairing password of SP2 is '0000'. The speaker can only pair with a Bluetooth transmitter whose pairing password is '0000'.
Using This Product + Call with SP2 Microphone mute During a call Double click ▶ll button Two falling tones Cancel mute During a call (microphone mute) Double click ▶ll button Two rising tones (Siri, S-Voice) Standby mode (connected device) Double click ▷ button One short tone Redial the last number Standby mode (connected device) Double click ▶ll button One short tone Voice dial ■ Three-way call operation Functions Status of SP2 Operation Answer new call and end current call There is a
Using This Product + Playing Music When SP2 connects to a mobile phone or Bluetooth transmitter that supports A2DP, you can enjoy music wirelessly.
Using This Product + USB Function SP2 supports USB data transmission function. You can use SP2 as a PC speaker via USB cable. 1. Turn on SP2 and connect it to a PC using a USB cable. 2. 'Installation Device Driver Software' window pops up on the PC screen. 3. Installation starts automatically. Sounds from the PC confirm the installation process is complete. 4. SP2 buttons also control the music that is being played by PC. - USB mode supports all of the functions of Windows XP, Windows 7 and Windows 8.
Using This Product + Indication Tone Indication tone Status of SP2 Continuous two “du du” tones every 10 seconds Conversation mode and microphone mute A string of warning tones every 1 minutes Low battery + Factory Reset (Initialization) In the status of standby mode, when SP2 is not connected with a Bluetooth device, press ▶ll and volume up '+' buttons long simultaneously about 5 seconds and release them when red and blue LEDs flash simultaneously, you will hear two 'du du' tones.
+ Troubleshooting + The red LED flashes instead of the blue LED. Battery is low. It needs to be recharged. + The red LED is off when charging. Please make sure the charging device connects with SP2 well. If you did not use SP2 for a long time, the battery may dry up. At this time, you have to charge the battery for 30 minutes. The red LED will be on. + Interruption occurs during music playback. Make sure the distance between SP2 and the mobile phone is in the available Bluetooth range.
COWON’s Warranty Policy COWON REPAIR CENTERS Center Center Location Web Site Korea Service Center Japan Service Center USA, Canada Service Center WorldWide Service Center Seoul, Korea Tokyo, Japan Irvine, USA www.cowon.com www.cowonjapan.com www.jetaudio.com Seoul, Korea www.cowonglobal.com / Support - Q&A Board [Important Notes] * Please retain the original dated sales receipt. Proof of the date of purchase will be required with any request for warranty service.
The terms and conditions of this COWON’s Warranty(hereafter referred to as “Warranty”) are only valid in the countries that the COWON product (hereafter referred as “Product”) was originally purchased. As warranty service is only available from within the country where the products were originally purchased, you may be required to ship products, at your expense, to the authorized service center for the country where the products were purchased.
