ver. 1.
3 Remote Keys for Navigator Up Movie Mode Music Mode Power Mute Navigator Mode Play/Pause Next Menu Previous Fast Forward (FF) Zoom In Rewind (REW) Left Zoom Out Right Enter Adjust Caption Timing Volume Down Add Bookmark Go to Bookmark Sleep Move Focus Show File List Close Current Mode Pan Scan LCD off - Please refer to Q5W manual for full function of the remote - The remote is included in Q5W Package Windshield Suction Mount Lock ① ③ ② Push Push COWON CR1
2 Quick Install Guide for Windows 98SE/ME/2000/XP Mac OS 10.x Navigator Cradle 1 2 4 5 6 7 8 9 3 10 11 1 GPS Antenna : SIRF III Internal GPS antenna for receiving satellite data. 2 FM Transmitter Switch : Sets FMT channel. FMT (FM Transmission) function allows playback 3 4 5 6 7 8 9 10 11 of the sound through the vehicle’s radio via FM transmission when the FM radio is set to the same frequency. I/O Connection Terminal : Connection port for connecting COWON Q5W.
1. Install the mount head of the windshield suction pedestal to the mounting hole of the cradle. 2. Please make sure to wipe all foreign material off the window. 3. Push the pedestal suction cup firmly to the windshield, then flip the number 1 lever down to secure the suction cup. 4. Use the number 2 and 3 knobs to adjust the angle and rotation of the pedestal to provide the best visibility. 5. Press and release the front of the cradle to release the cradle part for the COWON Q5W. 6.
1. Please make sure to wipe all foreign material off the connector and dashboard. 2. Remove the cover of adhesive tape and affix the connector to the dashboard. 3. Install the mount head of the pedestal to the mounting hole of the cradle. 4. Push the pedestal suction cup firmly to connector, then flip the number 1 lever down to secure the suction cup. 5. Use the number 2 and 3 knobs to adjust the angle and rotation of the pedestal to provide the best visibility. 6.
1. Installing Software When you insert the included installation DVD in the DVD drive, the installation program starts automatically. If it does not, run x:\autorun.exe (where x is the letter of your DVD drive) • Upgrading Firmware Upgrading firmware is highly recommended for best performance. To upgrade firmware, connect Q5W to the PC, press the “Upgrade Firmware” button, and then follow the procedure on the screen.
2. Activation Process After installing the NavMate navigation software on your device, please go to the following web site to obtain the code to activate the software: "http://www.horizonnav.com/activation/cowon" User name: cowon Password: 3r4t56 Voucher code is attached on the back of the cradle. For support, call 186 NAVMATE1 (1.866.286.2831). Voucher code will not be reissued if lost. Product return, activation and/or other services may not be provided without voucher code. 3.
Warning Screen Main Map Screen COWON CR1
▶Step 2 -- Select Destination You have many ways to select a destination. For this example, let’s find a nearby Airport. Select by touching screen: • icon to activate main menu. • Start Route Guidance • Point of Interest • State/Province NOTE: The software remembers the last State/Province, so this step is not necessary every time. • By Category • Airport • Sort by Distance • Select one of these and the system will calculate a route to that destination using the criteria set in the Setup menu.
▶Step 4 -- Arrive at Destination That’s it! You’ve arrived at the selected destination. Refer to the rest of this manual to become more familiar with the many options available on your NavMate software.
COWON CR1
