- iAUDIO M3 User's Guide

iAUDIO M3

What is JetShell?

JetShell is the iAUDIO manager program providing the following features:

• Downloading/Uploading les from/to iAUDIO (some les excluded).

• File management with the same structure as Windows Explorer

• Playing MP3, MP2, WAV, WMA, ASF, Audio CD, and Play List (M3U)

• MP3 le ripping from Audio CD

• Conversion between WAV/MP3/WMA

• Changing MP3 Bit rates

• Convenient le transfer using Download List

• A wide variety of spectrums, equalizers, and effects

• Editing CDDB and ID3 tags

• iAUDIO logo transfer

• Memory formatting

Running Environment for JetShell

• Pentium 200 Mhz or higher

• Memory of 32MB or more

• Free hard disk space of 20 MB or more

• Graphic card of 256 colors or higher

• Windows 98 SE/ME/2000/XP (NT is not supported)

• USB Port 1.1 or higher

• CD-ROM

Installing JetShell

1. Insert the iAUDIO Installation CD in the CD-ROM drive. The installation program starts automatically. It

may not start automatically sometimes depending on the status of the Windows operating system. In this

case, directly run CD-ROM:\Setup.exe or CD-ROM:\JetShell\Setup.exe.

2. When the installation nishes, JetShell is registered in Start → Programs → Cowon Systems → iAUDIO

M3 program group.

Connecting iAUDIO

Windows ME/2000/XP

1. Connect the USB ports of iAUDIO and your PC with a USB cable. (You should not use a USB hub, but

directly connect to the USB port on the main board.)

2. To make sure that the installation was complete, check if a new local disk has been created in ‘My

Computer’ as shown in the following picture (based on XP Home edition).

Connecting iAUDIO and Installing JetShell